 |
|
|
An all-terrain multi-role hover-capable aircraft has a unique fuel-efficient rugged vertical take-off and hover propulsion system.
|
|
|
|
|
|
This technology provides an elegant, efficient and cost effective way to measure absolute position in one or two dimensions using a new Point Coupled Linear Transformer (PCLT).
|
|
|
|
|
|
AIST has developed a thin film technology that can reduce the consumption of raw selenium below one-tenth of the conventional standard when manufacturing non-silicon-based CIGS thin-film solar cells.
|
|
|
|
|
|
The search for a transparent magnetic substance that is easy to manufacture has been ongoing for many years.
|
|
|
|
|
|
The Spherical Golubev Machine (SGM) is a revolutionary technology for the design and production of positive-displacement machines such as compressors, expanders, pumps, motors, engines and the like.
|
|
|
|
|
|
Finger seals are non-contact fluid seals similar in purpose to labyrinth or brush seals in that they act as a barrier between two areas of the same or different pressures, but allow a rotating shaft to penetrate through them from one side...
|
|
|
|
|
|
This innovative hot melt adhesive cures to a thermoset adhesive good for many applications in the vehicular market, home furnishings, edge binding, and electronics.
|
|
|
|
|
|
This technology is a thermoplastic antenna incorporating micron sized conductive fibers within the plastic matrix making it lightweight, corrosion-resistant, and easily fabricated.
|
|
|
|
|
|
This receiving technology, including commercialized product and its controlling system can take any signals from both GPS (maintained by USA) and GLONASS(maintained by Russia), besides Europian Satellite such as WAAS and EGNOS.One of the ...
|
|
|
|
|
|
This patented method and related stand alone software for predicting springback in hydroformed sheetmetal parts, referred to as Springback CalculatorÖ, has resulted in a reduction in tool development time, savings in tooling costs, reduct...
|
|
|
|
|
|
The High Power atomizer (HPA) can be used in aviation as well as ground machines and portables, which can be applied both for peaceful and for military purposes.
|
|
|
|
|
|
In laser-drilling ceramic composite for applications such as cooling holes ù including holes drilled at highly acute angles ù this technology creates a smooth bore that seals the compositeÆs reinforcing fibers.
|
|
|
|
|
|
This technology provides a method of laser-drilling any component under the control of real-time feedback to provide for predictable, calibrated fluid flow through one or an array of holes formed in the component.
|
|
|
|
|
|
This suite of broadly applicable laser machining and related control technologies was originally developed to improve high-volume laser fabrication of precision machine parts.
|
|
|
|
|
|
This patented surface contamination detection system enables accurate, automated, in-line inspection of metallic and composite panels prior to bonding, coating, painting or welding operations.
|
|
|
|
|
|
The present invention relates to the manufacturing process of a high-temperature ceramics-based composite material, which features excellent heat and oxidation resistance and frictional properties.
|
|
|
|
|
|
The present invention relates to a gauge for calibrating a three-dimensional coordinate measuring machine (CMM).
|
|
|
|
|
|
The rapid expansion of the Internet and the ever-increasing demand for bandwidth are fostering significant growth in the global cable and wiring market.
|
|
|
|
|
|
GaAs-based integrated circuit family offers high speed, low power circuits that are very radiation hardened and work at cryogenic and high temperatures.
|
|
|
|
|
|
Process for making self-supporting conductive films for electrical applications, such as packaging for transporting electrical components and static dissipating laminates for critical work benches and clean room environments.
|
|
|
|
|
|
This patented self-aligning nutplate enables faster, less expensive and more reliable assembly for parts having non-parallel and/or contoured outer surfaces by eliminating the need for shimming, counter-boring or spot-facing.
|
|
|
|
|
|
A new technology which applies a "grafting" technique to form strong adhesive bonds between mating material surfaces.
|
|
|
|
|
|
A carbon-based counter electrode enhances the operation and durability of electrochromic windows (ECWs), especially against UV radiation that would be encountered in automobile or architectural applications.
|
|
|
|
|
|
Functional and added value coatings and lacquers are big business in the current market, partly driven by todayÆs consumers and professional users placing high demands on products, in areas such as home appliances, components, packaging, ...
|
|
|
|
|
|
This new technology offers an adhesive that is suitable for making an electrically conductive connection to a material or system which is operated at high temperatures, or can even be a heating element.
|
|
|
|
|
|
This technology enables the use of dramatically less expensive flooded screw compressors instead of precision fit dry compressors.
|
|
|
|
|
|
Liquid crystal polymers (LCP's) represent a growing family of high performance engineering polymers.
|
|
|
|
|
|
Liquid Crystal Polymers (LCP's) are superb for making highly detailed, high performance parts such as microcircuit boards or electronic connectors.
|
|
|
|
|
|
A modular mono-polar direct methanol fuel cell (DMFC) cartridge and stack design, offering flexible assembly, is described.
|
|
|
|
|
|
Methods for joining and sealing the flow field plate to the gas diffusion layer or the coolant plate of a fuel cell structure are described.
|
|
|
|
|
|
The only technology of its kind, the Atomic Penetratioin of Materials (APM) technology diffuses the atoms from superior metal(s) and implants them into the interstitial spaces of surface molecules of existing metal parts, creating patenta...
|
|
|
|
|
|
This invention relates to adhesive strips.
|
|
|
|
|
|
This technology targets changing the wettability of liquid on the surface merely through heat applied by laser beam irradiation, and to make wettability reversible.
|
|
|
|
|
|
Carbon-fiber reinforcement in laminate structures has resulted in great improvement in tensile strength, but much-less-than-theoretical improvement in compressive strength.
|
|
|
|
|
|
These passive and active vibration isolation systems use fluid-filled chambers and are LIVE« (liquid inertial vibration eliminator) systems, which effectively isolate a component from harmonic vibration, such as the vibration prevalent in...
|
|
|
|
|
|
Honeywell's comprehensive training and certification program is based upon an accumulated knowledge base aimed at increasing the number of highly trained, certified satellite operations personnel.
|
|
|
|
|
|
Honeywell's comprehensive training and certification program is based upon an accumulated knowledge base aimed at increasing the number of highly trained, certified satellite operations personnel.
|
|
|
|
|
|
The ingenious polymers of this technology package can save both time and money as they are easy to use and can reduce down time; with excellent electrical conductivity and water solubility, these novel polymers can be blended with binders...
|
|
|
|
|
|
Honeywell's novel design for an optical liquid level sensor eliminates the need for encapsulation material to seal the light source, detector, and associated wire bonds within the assembly.
|
|
|
|
|
|
Ideal for aircraft panels and other applications requiring transparent, burn-resistant film or sheet, this blend of polyarylate and poly(ether ketone ketone) is produced by this technology.
|
|
|
|
|
|
Honeywell has developed a unique method to produce rocket nozzles with the capacity to withstand the higher combustion temperatures required by today's rocket propulsion industry.
|
|
|
|
|
|
Honeywell's inventive system monitors battery status (and engine conditions) and controls the alternator to selectively charge the battery.
|
|
|
|
|
|
The software enables the same predictable level of stability for each tone level when printed on a multilevel rendering printer.
|
|
|
|
|
|
Honeywell has developed a low cost, state-of the-art, noncontact fluid seal or oil seal which eliminate output shaft seal leakage and maintain optimum lubrication at very high rotational speeds.
|
|
|
|
|
|
Honeywell offers an innovative load driver circuit which achieves both high efficiency and fault tolerance.
|
|
|
|
|
|
Maintaining a uniform web is a significant challenge in the manufacture of stretchable materials.
|
|
|
|
|
|
"Optimized Material Usage in Blow-Molded Parts" (OMU) is a software simulation package that can provide information for optimizing the design and manufacture of blow-molded parts.
|
|
|
|
|
|
This invention provides a unique, inexpensive means of allowing liquids in a liquid/gas medium to pass substantially in only one direction while simultaneously preventing the transmission of odors (gases) in the opposite direction.
|
|
|
|
|
|
A freshly vacuum deposited metal layer is immediately protected under vacuum by laminating a protective resin layer in the same environment.
|
|
|
|
|
|
SOI is a mature integrated circuit technology that results in fewer masking steps, higher transistor packing density, reduced capacitive coupling to the substrate, and lower power consumption vs. standard CMOS processes.
|
|
|
|
|
|
DuPont has successfully developed a less complex, lower cost electrochromatic (EC) technology for controllable light transmission in automotive and architectural safety glazing applications.
|
|
|
|
|
|
The Aircraft Landing/Taxiing Guidance System is the revolutionary new inexpensive tool for safer and accurate landing of todayÆs many different aircraft.
|
|
|
|
|
|
Nanoporous low dielectric constant materials are fabricated from a first reagent and a second reagent.
|
|
|
|
|
|
An engine with a very low part count, High power density, and flexibility to operate with a constant pressure burn for high power and constant volume burn for high efficiency is in the concept stage but could prove to be disruptive techno...
|
|
|
|
|
|
A process for forming a nanoporous dielectric coating on a substrate.
|
|
|
|
|
|
Avery Dennison Corporation has developed a labeling system that enables the placement of frangible film on a surface.
|
|
|
|
|
|
A multi-domain halftone gray scale active matrix liquid crystal display utilizing a mono-gap configuration for achieving a very wide viewing angle at a low-cost.
|
|
|
|
|
|
This technology provides a method of encoding and decoding data for fiber optic transmission and reception.
|
|
|
|
|
|
This technology enables production of products that resist corrosion and retain their strength even at extremely high temperatures, yet are extremely lightweight.
|
|
|
|
|
|
This technology enables control of aircraft or automobile brake systems by monitoring the speeds and acceleration rates of the individual wheels of the vehicle.
|
|
|
|
|
|
Heat exchangers are useful in transferring heat from hot fluid streams to a colder ones and are employed in a wide variety of thermodynamic devices including air-conditioners, refridgerators, freezers, engines, electronic devices, and in ...
|
|
|
|
|
|
A sensor that receives ultraviolet light over a large field of view and detects the position of ultraviolet light source(s) using a large electronic detector array.
|
|
|
|
|
|
This software significantly increases the effectiveness and safety of user interfaces using Microsoft Windows to provide access to critical real-time data used for rapid decision-making.
|
|
|
|
|
|
Polyacrylonitrile fibers are used to make a duplex cloth from which segments are cut, each segment sequentially placed on a foamed support and needled together with the underlying segments, to build-up a multi-layer, donut shaped preform ...
|
|
|
|
|
|
This technology relates to a lubricative coating and filler material for restoring metal surfaces that have been scratched, scored, grooved or otherwise damaged to a functional condition to avoid costly repairs and minimizing scrap for me...
|
|
|
|
|
|
A compact pressure sensor (about half the size of a cigarette package) that produces highly accurate pressure measurements is provided.
|
|
|
|
|
|
This technology provides a bi-directional (step-up and step-down) DC-to-DC voltage converter with a regulated output.
|
|
|
|
|
|
A hand controller joystick that provides a simulated feel of torque and other forces on the stick normally projected by the operator to be felt in situations involving use of the joystick.
|
|
|
|
|
|
A method for creating display screens and operator interface controls for a wide range of stand-alone process control and measurement instruments that are incapable of supporting a Display Editor.
|
|
|
|
|
|
A system that quickly and accurately estimates the position of a helmet using a stationary, chassis-mounted ultraviolet light source, helmet-mounted ultraviolet reflectors, and an ultraviolet-sensing video camera.
|
|
|
|
|
|
We are working with a multi-national group offering a wide range of specialist, high-value coatings and coating techniques to global, blue-chip industrial customers coatings are highly effective and wear resistant, and are used in a numbe...
|
|
|
|
|
|
The silicone foam must be very light - 0,15 Kilos/cubicmeterThe cells must have very similar sizeThe silicone foam must be very elastic (instant and total shape recovery after deformation)The foam must have a very good water absorption co...
|
|
|
|
|
|
OVERVIEWThis organization wants to reduce magnetron sputtering deposition times from (for example) 17 hours to 2-3 hours.
|
|
|
|
|
|
OVERVIEWThis organization is seeking a method to determine the cloud ceiling height up to at least 3000 feet (ideally up to 20,000 ft), cloud coverage, and visibility up to at least 5 miles using a small, low power automatic sensor.
|
|
|
|
|
|
A transparent thin coating or film to be applied on cross linked polystyrene blocks that will be in contact with an aquoseus couple gel to improve scratch resistance and surface hardness with the following parameters.
|
|
|
|
|
|
Digital Rights Management solution that operates based on location using reliable Global Positioning Services (GPS) Digital media management Technology should be able to limit the use of digital assets based on location digital rights man...
|
|
|
|
|
|
This substance must be capable of transporting nano-size particles of 80 to 90% volume Sn/Ag/Cu mix.
|
|
|
|
|
|
Plasma Ion nitriding of high precision/high performane power gears.
|
|
|
|
|
|
This organization, represented by yet2.com, seeks to purchase US patents that cover many aspects of MIMO (Multiple-Input/Multiple-Output) technologies.
|
|
|
|
|
|
Presently, cotton material, tightly weaved is used to provide absorbtion and release of various chemicals.
|
|
|
|
|
|
The requirment is for a cohenrent fibre optic bundle that provides pixel to pixel relocation between the source and the display.
|
|
|
