 |
|
|
Airqube is an acoustic technology that lets in fresh air but blocks out 85% of incoming noise.
|
|
|
|
|
|
Developed for the automotive industry, where the rapid detection of the partial pressure of oxygen is critical to controlling the air-fuel ratio in modern electronic fuel injection systems, this new-type semiconductor resistance sensor of...
|
|
|
|
|
|
This comprehensive electrocoating offering contains features and options that enable the licensee to practice a robust process.
|
|
|
|
|
|
This technology provides an elegant, efficient and cost effective way to measure absolute position in one or two dimensions using a new Point Coupled Linear Transformer (PCLT).
|
|
|
|
|
|
One of the most important attributes of coatings on substrates is the adhesion of the coating to the substrate.
|
|
|
|
|
|
The Square Piston Engine (SPEC) represents the next stage in the evolution of the reciprocating internal combustion engine.
|
|
|
|
|
|
This GPS-enabled accessory transforms MP3 players like the Apple iPod mobile digital device into location-specific playback devices, suitable for audio tours.
|
|
|
|
|
|
A high speed, low cost optical deflecting element made possible by orienting ferroelectric liquid crystal perpendicularly onto the substrate.
|
|
|
|
|
|
A common problem encountered in the construction sector is that a wheeled scraper or other heavy construction equipment gets stuck due to unstable terrain.
|
|
|
|
|
|
The search for a transparent magnetic substance that is easy to manufacture has been ongoing for many years.
|
|
|
|
|
|
The Spherical Golubev Machine (SGM) is a revolutionary technology for the design and production of positive-displacement machines such as compressors, expanders, pumps, motors, engines and the like.
|
|
|
|
|
|
Ideal for vehicle finishes and specialty paints, these multi-layer formulations contain (in at least one color imparting layer) three-dimensional photonic crystals that impart interference effects.
|
|
|
|
|
|
Finger seals are non-contact fluid seals similar in purpose to labyrinth or brush seals in that they act as a barrier between two areas of the same or different pressures, but allow a rotating shaft to penetrate through them from one side...
|
|
|
|
|
|
This new patented technology enables the integration of passive components into the printed circuit board (PCB).
|
|
|
|
|
|
The attractiveness of almost all industrial products is strongly governed by the visual quality and appearance of their finish.
|
|
|
|
|
|
This technology features a uniquely designed suction head that eliminates problems typically experienced in alluvial diamond mining, mud, sewerage pumping or dredging operations.
|
|
|
|
|
|
This innovative hot melt adhesive cures to a thermoset adhesive good for many applications in the vehicular market, home furnishings, edge binding, and electronics.
|
|
|
|
|
|
This technology is a thermoplastic antenna incorporating micron sized conductive fibers within the plastic matrix making it lightweight, corrosion-resistant, and easily fabricated.
|
|
|
|
|
|
The Jettison D« is a revolutionary ionizer that works in conjunction with a diesel engineÆs emission control system to decrease the amount of pollutants emitted while improving fuel economy, reducing maintenance and enhancing engine perfo...
|
|
|
|
|
|
METTEX is a new electroplating solution for coating consumable metals that can be used to replace chrome as industrial and decorative coating.
|
|
|
|
|
|
Light and recyclable magnesium alloy has been drawing attention and is widely used for practical purposes such as mobile electronic equipment and vehicles.
|
|
|
|
|
|
The Environment Purification Materials team of AIST's Synergy Materials Research Center (Japan) has successfully developed and tested significantly improved electrochemical reactors for the selective elimination of nitrogen oxides (NOx) i...
|
|
|
|
|
|
AIST researchers have developed a thin film alloy of magnesium and titanium that, when applied to glass, may be easily switched between a reflective and transparent state.
|
|
|
|
|
|
StrobeWiseÖ, in its preferred embodiment, is a patented, microprocessor-based, groundbreaking anti-collision deceleration warning technology developed for motor vehicles.
|
|
|
|
|
|
This patented method and related stand alone software for predicting springback in hydroformed sheetmetal parts, referred to as Springback CalculatorÖ, has resulted in a reduction in tool development time, savings in tooling costs, reduct...
|
|
|
|
|
|
This technology provides improved scratch resistance in industrial and automobile coatings by creating higher density crosslinked clear coats.
|
|
|
|
|
|
In laser-drilling ceramic composite for applications such as cooling holes ù including holes drilled at highly acute angles ù this technology creates a smooth bore that seals the compositeÆs reinforcing fibers.
|
|
|
|
|
|
This technology provides a method of laser-drilling any component under the control of real-time feedback to provide for predictable, calibrated fluid flow through one or an array of holes formed in the component.
|
|
|
|
|
|
This suite of broadly applicable laser machining and related control technologies was originally developed to improve high-volume laser fabrication of precision machine parts.
|
|
|
|
|
|
This system uses a simple and innovative concept to allow the creation of a wide range of lightweight, three-dimensional, folding structures with flexible joints.
|
|
|
|
|
|
This patented surface contamination detection system enables accurate, automated, in-line inspection of metallic and composite panels prior to bonding, coating, painting or welding operations.
|
|
|
|
|
|
The present invention relates to the manufacturing process of a high-temperature ceramics-based composite material, which features excellent heat and oxidation resistance and frictional properties.
|
|
|
|
|
|
The present invention relates to a gauge for calibrating a three-dimensional coordinate measuring machine (CMM).
|
|
|
|
|
|
Computer controlled, programable control interface that allows safe intuitive manual control for motorized vehicles that typically move heavy loads or operate in variable terrain.
|
|
|
|
|
|
Process for making self-supporting conductive films for electrical applications, such as packaging for transporting electrical components and static dissipating laminates for critical work benches and clean room environments.
|
|
|
|
|
|
This patented self-aligning nutplate enables faster, less expensive and more reliable assembly for parts having non-parallel and/or contoured outer surfaces by eliminating the need for shimming, counter-boring or spot-facing.
|
|
|
|
|
|
Rapid solidification rate (RSR) technology enables production of fine-grained (nanometer-scale) and amorphous metals with uniform chemistry.
|
|
|
|
|
|
This is a variable ratio transmission that varies output drive shaft speed by the sliding forward and backward movements of the output shaft drive disk along a conical shaped input drive surface.
|
|
|
|
|
|
The Car Alarm with Automatic Dialer is an alarm that will call a cell phone or pager when there is an occurrence with the ownerÆs vehicle.
|
|
|
|
|
|
A new technology which applies a "grafting" technique to form strong adhesive bonds between mating material surfaces.
|
|
|
|
|
|
This technology relates to a remote controlled device for releasing a child(ren) from a car seat.
|
|
|
|
|
|
A carbon-based counter electrode enhances the operation and durability of electrochromic windows (ECWs), especially against UV radiation that would be encountered in automobile or architectural applications.
|
|
|
|
|
|
Functional and added value coatings and lacquers are big business in the current market, partly driven by todayÆs consumers and professional users placing high demands on products, in areas such as home appliances, components, packaging, ...
|
|
|
|
|
|
In today's modern heating appliance market, attractive design and the ability of the appliance to heat up fast are critical for the commercial success of a product.
|
|
|
|
|
|
This technology enables the use of dramatically less expensive flooded screw compressors instead of precision fit dry compressors.
|
|
|
|
|
|
Liquid crystal polymers (LCP's) represent a growing family of high performance engineering polymers.
|
|
|
|
|
|
Liquid Crystal Polymers (LCP's) are superb for making highly detailed, high performance parts such as microcircuit boards or electronic connectors.
|
|
|
|
|
|
The CG-Lock is a patented, true ôfirst-of-its-kindö product.
|
|
|
|
|
|
The NoZone technology has been developed to remove ozone from the environment, ozone has proven harmful effects which are heighten in suffers of asthma, rhinitis and many other allergies (hay-fever and pet allergies etc).
|
|
|
|
|
|
This apparatus provides for a consistent color evaluation of paints containing metallic flakes.
|
|
|
|
|
|
This new Electrochromic (EC) Devices show improved contrast.
|
|
|
|
|
|
A modular mono-polar direct methanol fuel cell (DMFC) cartridge and stack design, offering flexible assembly, is described.
|
|
|
|
|
|
Methods for joining and sealing the flow field plate to the gas diffusion layer or the coolant plate of a fuel cell structure are described.
|
|
|
|
|
|
This is a contact-less measuring technique, simple in composition yet featuring second order angular measurement precision.
|
|
|
|
|
|
The only technology of its kind, the Atomic Penetratioin of Materials (APM) technology diffuses the atoms from superior metal(s) and implants them into the interstitial spaces of surface molecules of existing metal parts, creating patenta...
|
|
|
|
|
|
This invention relates to adhesive strips.
|
|
|
|
|
|
We offer a display technology packaged in a thin, unbreakable, flexible, and easy to handle display.
|
|
|
|
|
|
New process technology to treat polyester yarn with an aziridine compound provides improved bond strength--especially to rubber particles.
|
|
|
|
|
|
This technology targets changing the wettability of liquid on the surface merely through heat applied by laser beam irradiation, and to make wettability reversible.
|
|
|
|
|
|
Individuals seeking information on the Internet or in large document databases typically use a search engine to search for keywords contained within a web page or document.
|
|
|
|
|
|
Carbon-fiber reinforcement in laminate structures has resulted in great improvement in tensile strength, but much-less-than-theoretical improvement in compressive strength.
|
|
|
|
|
|
We have satisfied the contradicting requirements to simultaneously achieve high-precision transfer while reducing manufacturing cycle time.
|
|
|
|
|
|
These passive and active vibration isolation systems use fluid-filled chambers and are LIVE« (liquid inertial vibration eliminator) systems, which effectively isolate a component from harmonic vibration, such as the vibration prevalent in...
|
|
|
|
|
|
This revolutionary control valve enables fast and efficient switching between open-center and closed-center hydraulic systems.
|
|
|
|
|
|
Honeywell's improved, nonwoven battery separator promotes fluid flow through use of a new type of tri-lobal, hollow fiber.
|
|
|
|
|
|
Honeywell's proprietary Sign-On Manager software for Total Plant Solutions (TPS) client applications performs security checks for a "user" other than the current user.
|
|
|
|
|
|
Honeywell's novel design for an optical liquid level sensor eliminates the need for encapsulation material to seal the light source, detector, and associated wire bonds within the assembly.
|
|
|
|
|
|
Honeywell's inventive magnetic geartooth sensor and associated circuit determines a threshold value as a function of the minimum and average output values from a sensor output.
|
|
|
|
|
|
Honeywell's inventive system monitors battery status (and engine conditions) and controls the alternator to selectively charge the battery.
|
|
|
|
|
|
The corrosion of aluminum surfaces is a significant concern in industries which benefit from the lightweight quality of aluminum component materials.
|
|
|
|
|
|
Honeywell's novel process provides for both purification and reinhibition of recycled antifreeze/coolant (A/C) used in the cooling systems of internal combustion engines.
|
|
|
|
|
|
This patented technology improves efficiency and throughput to equipment suppliers and end users alike who spray or extrude fluids of all types through nozzles; utilizing ultrasonic energy in a unique nozzle configuration, end users gain ...
|
|
|
|
|
|
Honeywell has developed a low cost, state-of the-art, noncontact fluid seal or oil seal which eliminate output shaft seal leakage and maintain optimum lubrication at very high rotational speeds.
|
|
|
|
|
|
Honeywell offers an innovative load driver circuit which achieves both high efficiency and fault tolerance.
|
|
|
|
|
|
A novel pressure-sensitive assembly has been designed--being more reliable and repeatable than competing devices.
|
|
|
|
|
|
Honeywell has developed a precious metal alloy which offers superior high temperature erosion resistance and improved durability over pure platinum, pure iridium, pure gold, and 90% platinum-10% nickel alloy.
|
|
|
|
|
|
This low cost, opto-thermal sensing system has been designed to sense toxic gases.
|
|
|
|
|
|
Plastics monofilaments might be expected to have advantages over metal "wire" in mechanical push-pull power transmission operations such as that used to raise and lower an automotive radio antenna.
|
|
|
|
|
|
The process offered here enables the manufacture of plastic parts with smooth skins and foamed cores.
|
|
|
|
|
|
Maintaining a uniform web is a significant challenge in the manufacture of stretchable materials.
|
|
|
|
|
|
The inventor has successfully designed, fabricated and integrated advanced vibration isolation and damping systems.
|
|
|
|
|
|
The principal subject for this invention is to provide a drive system for a moveable crossover box that is electrically powered and which is economical to manufacture and convenient to use.
|
|
|
|
|
|
The Vector Blind Spot Detector System is a transportation safety device that eliminates the driverÆs blind spot areas.
|
|
|
|
|
|
In crowed cities across America, automobile drivers are faced with the task of getting from point A to point B in a timely fashion.
|
|
|
|
|
|
The Freeway Power Generator is an innovative tool utilized in converting the motion of moving vehicles in generating useful amounts of energy.
|
|
|
|
|
|
DuPont has successfully developed a less complex, lower cost electrochromatic (EC) technology for controllable light transmission in automotive and architectural safety glazing applications.
|
|
|
|
|
|
This hot melt polyurethane (PUR) formulation is resistant enough to premature polymerization from humidity to allow long term storage, even of individual parts coated with the PUR adhesive prior to pasting.
|
|
|
|
|
|
This technology is a range of compositions, their synthesis methods, and application method for a clear coating composition comprising isocyanate, silane and melamine components wherein said isocyanate component comprises an aliphatic pol...
|
|
|
|
|
|
This technology comprises the composition and application technique for UV curable coatings for metallized or conductive plastic parts.
|
|
|
|
|
|
This technology provides a low temperature curing coating for metal structures such as oil storage tanks, bridges, ships, and buildings, enabling application in Northern climates with their cooler and shorter windows for application.
|
|
|
|
|
|
The FLASH is a patented product designed for road safety.
|
|
|
|
|
|
The Engine Temperature Monitoring Device is a heat sensor coupled to an alarm signal system which alerts a vehicle operator to shut down an engine when its temperature is at an unacceptably high level.
|
|
|
|
|
|
Kostitsyn IP (Kostitsyn Intellectual Properties) issues notice of sale of US Patent# 5870893.
|
|
|
|
|
|
This technology produces novel branched dendritic polymers with wide application in lacquers and coatings for the automotive, appliance, and industrial markets.
|
|
|
|
|
|
This silicon proven technology is intended for embedding as software or as a hard-wired System On Chip in digital still & video cameras, mobile phones & PDAs, automotive, security & surveillance, PC/Web cameras and industrial vision.
|
|
|
|
|
|
This process produces an attrition-resistant VPO catalyst useful for fluidized bed oxidations of lower alkanes such as n-butane to maleic anhydride.
|
|
|
|
|
|
This quantitative testing device measures the sprayability of a dispersion under conditions found in commercial practice.
|
|
|
|
|
|
This holographic pigment, useful for automotive and truck coatings, can be applied to cold roll or phosphatized steel, polyester reinforced fiberglass, reaction injection molded urethane, and crystalline amorphous polyamide.
|
|
|
|
|
|
An engine with a very low part count, High power density, and flexibility to operate with a constant pressure burn for high power and constant volume burn for high efficiency is in the concept stage but could prove to be disruptive techno...
|
|
|
|
|
|
Avery Dennison Corporation has developed a labeling system that enables the placement of frangible film on a surface.
|
|
|
|
|
|
For use in headlights, tailights, traffic lights, lanterns, and other applications requiring precise beam control, especially suited for applications requiring a large diameter lens in a restricted depth.
|
|
|
|
|
|
Honeywell's economical filtration process continuously captures undesirable air borne odor or gas contaminants from an air stream through unique trilobal wicking fibers.
|
|
|
|
|
|
A device for sensing whether a driver has been drinking by analyzing the driver's voice, which includes a parameter extractor for producing a parameter corresponding to a linear prediction coefficient-cepstrum coefficient extracted from a...
|
|
|
|
|
|
We are seeking partnerships/collaboration for alternative and fuel efficiency technologies.
|
|
|
|
|
|
The silicone foam must be very light - 0,15 Kilos/cubicmeterThe cells must have very similar sizeThe silicone foam must be very elastic (instant and total shape recovery after deformation)The foam must have a very good water absorption co...
|
|
|
|
|
|
OVERVIEW Technology is required to enable "in-process" or real-time detection of defects during the welding process.
|
|
|
|
|
|
A transparent thin coating or film to be applied on cross linked polystyrene blocks that will be in contact with an aquoseus couple gel to improve scratch resistance and surface hardness with the following parameters.
|
|
|
|
|
|
This substance must be capable of transporting nano-size particles of 80 to 90% volume Sn/Ag/Cu mix.
|
|
|
|
|
|
We are looking for a solution able to produce bended profiles with variable and as small as possible bending radious.
|
|
|
|
|
|
Project requires a precision digital compass with azimuth accuracy of 0.5 degrees or better.
|
|
|
|
|
|
I am looking for a remote activated automotive covering that can be stretched to provide shade over a car that is parked under the sun.
|
|
|
|
|
|
Presently, cotton material, tightly weaved is used to provide absorbtion and release of various chemicals.
|
|
|
|
|
|
The requirment is for a cohenrent fibre optic bundle that provides pixel to pixel relocation between the source and the display.
|
|
|
