 |
|
|
Design and automated production of plastic polymer materials or final products using web extrusion, casting, thermoforming, or vacuforming.
|
|
|
|
|
|
Energy-saving nozzles for spray systems save on operational and capital equipment costs by using lower pressures and less piping while achieving finer mists and better coverage.
|
|
|
|
|
|
By suppressing or controlling harmonic currents and voltages of the motor to overcome torque ripple, this system improves the efficiency and torque performance of an AC motor, especially permanent magnet synchronous motors (PMSM), which a...
|
|
|
|
|
|
This technology gives hard-surface plastics a soft and moist feel at a much lower cost even than ôsoft-feelö paint by imposing a "grain" or texturing onto the surface.
|
|
|
|
|
|
SOFILEZ is a synthetic leather material developed by Nissan that delivers a touch-feel (or hand) superior to the high-quality natural leather used in apparel and furniture applications, but that is also more durable than existing syntheti...
|
|
|
|
|
|
DuPont has successfully developed a less complex, lower cost electrochromatic (EC) technology for controllable light transmission in automotive and architectural safety glazing applications.
|
|
|
|
|
|
100 miles per gallon, full size vehicles, zero toxic exhaust.
|
|
|
|
|
|
-The national institute of AIST in Japan has developed a flexible switchable mirror film that can be electrically switched between reflective and transparent states.
|
|
|
|
|
|
-The national institute of AIST in Japan has developed switchable mirror devices that can be reversibly changed between reflective and transparent states by either exposing gas or applying electricity.
|
|
|
|
|
|
Developed at a Fortune 500 company, this innovation is a method to control an electric drive transmission that includes an internal combustible engine, which simulates a mechanical clutch for the purpose of modulating torque in order to c...
|
|
|
|
|
|
Airqube is an acoustic technology that lets in fresh air but blocks out 85% of incoming noise.
|
|
|
|
|
|
Melt-Film Fibrillation (MFF) technology produces a facing for acoustic batts for vehicle sound insulation that offers equivalent or superior sound-deadening performance at reduced weight and cost.
|
|
|
|
|
|
òHigh light-extraction efficiency is achieved by fabrication of ridges on a semiconductor surface and subsequent deposition of a silicon dioxide (SiO2) layer on the ridges.
|
|
|
|
|
|
This innovative hot melt adhesive remains a thermoplastic to a thermoset adhesive good for many applications in the vehicular market, home furnishings, edge binding (banding), and electronics.
|
|
|
|
|
|
This patent portfolio provides 17 issued US patents and associated foreign filings in MEMS (micro-electro-mechanical systems), with priority dates from 1997 to 2005.
|
|
|
|
|
|
A solution now exists for reducing a two trailer and dolly hook and drop operation by 33%, providing numerous additional benefits to LTL carriers, and other operators of trailers in tow.
|
|
|
|
|
|
An unique technology for the damping of impacts that is able to completely control the damping process in a computerized way, reaching maximum efficiency and effectivity.
|
|
|
|
|
|
Technology offers a new lightweight Thermal Barrier Mineral Foam Composite that is economical and includes low flame spread and smoke developed rating.
|
|
|
|
|
|
Many people suffer from back pain which can be exasperated by sitting in a chair for long periods of time or in a chair with inadequate spinal support.
|
|
|
|
|
|
This technology is about a system to screw and unscrew screws or nuts with special heads, with the following specificities: It allows a self centering operation, with high-speed mechanical screwing possible; a high torque transmission bet...
|
|
|
|
|
|
This micro-reinforcement technology enables new applications where existing thermoplastics, elastomers, thermosets, and reinforcing technologies have not had sufficient toughness or fracture strength, particularly at elevated temperatures...
|
|
|
|
|
|
Affordable, consumer-friendly, printable, ôpop-upö weather shields and covers for vehicles.
|
|
|
|
|
|
Typical mechanical joints limit rotation, movement, and torque, whereas the illustrated universal joint enables constant power at wide angles generating versatile and extensive uses without jeopardizing power.
|
|
|
|
|
|
There are over 200 billion fasteners consumed each year in the U.S. Within this massive fastener market a void exists for a truly ôpositive-locking/vibration proofö fastener.
|
|
|
|
|
|
This technology comprises a family of non-halogenated polymers and compound formulation technologies with performance and cost competitiveness for many PVC applications.
|
|
|
|
|
|
This technology provides an easy and inexpensive method of manufacturing a high-performance piezoelectric element from an aluminum nitride thin film that exhibits no hillocks or cracks, and which does not peel off.
|
|
|
|
|
|
This technology provides the manufacturing process for and the composition of a family of thermally stable polymers having a glycidyl moiety which contains an N-cyclohexyl-aminopropyl trimethoxysilane or other N-alkyl- or N-arylalkylamino...
|
|
|
|
|
|
3-dimesional high aspect ratio (>500) nano-scale CFx (fluorocarbon) ôtubeö and ôtest-tubeö arrays were realized using Deep Reactive Ion Etching (RIE).
|
|
|
|
|
|
This suite of broadly applicable laser machining and related control technologies was originally developed to improve high-volume laser fabrication of precision machine parts.
|
|
|
|
|
|
This technology provides a method of laser-drilling any component under the control of real-time feedback to provide for predictable, calibrated fluid flow through one or an array of holes formed in the component.
|
|
|
|
|
|
Introduction of very high concentrations of hollow glass spheres homogenously into a resin during moulding into highly complex functional shapes.
|
|
|
|
|
|
Developed for the automotive industry, where the rapid detection of the partial pressure of oxygen is critical to controlling the air-fuel ratio in modern electronic fuel injection systems, this new-type semiconductor resistance sensor of...
|
|
|
|
|
|
This technology provides an elegant, efficient and cost effective way to measure absolute position in one or two dimensions using a new Point Coupled Linear Transformer (PCLT).
|
|
|
|
|
|
The Spherical Golubev Machine (SGM) is a revolutionary technology for the design and production of positive-displacement machines such as compressors, expanders, pumps, motors, engines and the like.
|
|
|
|
|
|
This innovative hot melt adhesive cures to a thermoset adhesive good for many applications in the vehicular market, home furnishings, edge binding, and electronics.
|
|
|
|
|
|
This technology is a thermoplastic antenna incorporating micron sized conductive fibers within the plastic matrix making it lightweight, corrosion-resistant, and easily fabricated.
|
|
|
|
|
|
METTEX is a new electroplating solution for coating consumable metals that can be used to replace chrome as industrial and decorative coating.
|
|
|
|
|
|
Light and recyclable magnesium alloy has been drawing attention and is widely used for practical purposes such as mobile electronic equipment and vehicles.
|
|
|
|
|
|
The Environment Purification Materials team of AIST's Synergy Materials Research Center (Japan) has successfully developed and tested significantly improved electrochemical reactors for the selective elimination of nitrogen oxides (NOx) i...
|
|
|
|
|
|
AIST researchers have developed a thin film alloy of magnesium and titanium that, when applied to glass, may be easily switched between a reflective and transparent state.
|
|
|
|
|
|
StrobeWiseÖ, in its preferred embodiment, is a patented, microprocessor-based, groundbreaking anti-collision deceleration warning technology developed for motor vehicles.
|
|
|
|
|
|
This patented method and related stand alone software for predicting springback in hydroformed sheetmetal parts, referred to as Springback CalculatorÖ, has resulted in a reduction in tool development time, savings in tooling costs, reduct...
|
|
|
|
|
|
This technology provides improved scratch resistance in industrial and automobile coatings by creating higher density crosslinked clear coats.
|
|
|
|
|
|
This patented surface contamination detection system enables accurate, automated, in-line inspection of metallic and composite panels prior to bonding, coating, painting or welding operations.
|
|
|
|
|
|
The present invention relates to the manufacturing process of a high-temperature ceramics-based composite material, which features excellent heat and oxidation resistance and frictional properties.
|
|
|
|
|
|
The present invention relates to a gauge for calibrating a three-dimensional coordinate measuring machine (CMM).
|
|
|
|
|
|
This patented self-aligning nutplate enables faster, less expensive and more reliable assembly for parts having non-parallel and/or contoured outer surfaces by eliminating the need for shimming, counter-boring or spot-facing.
|
|
|
|
|
|
Rapid solidification rate (RSR) technology enables production of fine-grained (nanometer-scale) and amorphous metals with uniform chemistry.
|
|
|
|
|
|
A new technology which applies a "grafting" technique to form strong adhesive bonds between mating material surfaces.
|
|
|
|
|
|
This technology relates to a remote controlled device for releasing a child(ren) from a car seat.
|
|
|
|
|
|
This technology enables the use of dramatically less expensive flooded screw compressors instead of precision fit dry compressors.
|
|
|
|
|
|
The NoZone technology has been developed to remove ozone from the environment, ozone has proven harmful effects which are heighten in suffers of asthma, rhinitis and many other allergies (hay-fever and pet allergies etc).
|
|
|
|
|
|
The only technology of its kind, the Atomic Penetratioin of Materials (APM) technology diffuses the atoms from superior metal(s) and implants them into the interstitial spaces of surface molecules of existing metal parts, creating patenta...
|
|
|
|
|
|
This invention relates to adhesive strips.
|
|
|
|
|
|
Carbon-fiber reinforcement in laminate structures has resulted in great improvement in tensile strength, but much-less-than-theoretical improvement in compressive strength.
|
|
|
|
|
|
These passive and active vibration isolation systems use fluid-filled chambers and are LIVE« (liquid inertial vibration eliminator) systems, which effectively isolate a component from harmonic vibration, such as the vibration prevalent in...
|
|
|
|
|
|
This revolutionary control valve enables fast and efficient switching between open-center and closed-center hydraulic systems.
|
|
|
|
|
|
This technology comprises a family of polyurethanes and polyurethane-ureas prepared from: polytrimethylene ether glycol, diisocyantes, and diol or diamine chain extenders, and their manufacture, intermediates and use.
|
|
|
|
|
|
Appliances, furniture, toys, and especially vehicle interiors have thermoplastic surfaces that require a high quality finish coating.
|
|
|
|
|
|
This technology provides a means for recycling high cost specialty rubbers.
|
|
|
|
|
|
Distance Control Assist System enables vehicles to activate various barriers to help the driver, passengers and other road users avoid danger from normal driving conditions through post accident conditions.
|
|
|
|
|
|
Nissan has added a new low-speed following capability to Intelligent Cruise Control.
|
|
|
|
|
|
Using 4 separate cameras, the monitor displays an image of the vehicle from above.
|
|
|
|
|
|
The newly developed ECO Pedal system - the world's first technology of its type - is designed to assist drivers in fuel efficient driving through control over excess fuel consumption during start and acceleration.
|
|
|
|
|
|
To build driver confidence, Nissan developed three functions using the VDC system for smooth operations and behavior.
|
|
|
|
|
|
The system assists the driver avoid unintended lane departure.
|
|
|
|
|
|
The principal subject for this invention is to provide a drive system for a moveable crossover box that is electrically powered and which is economical to manufacture and convenient to use.
|
|
|
|
|
|
The Vector Blind Spot Detector System is a transportation safety device that eliminates the driverÆs blind spot areas.
|
|
|
|
|
|
The FLASH is a patented product designed for road safety.
|
|
|
|
|
|
This process produces an attrition-resistant VPO catalyst useful for fluidized bed oxidations of lower alkanes such as n-butane to maleic anhydride.
|
|
|
|
|
|
This quantitative testing device measures the sprayability of a dispersion under conditions found in commercial practice.
|
|
|
|
|
|
An engine with a very low part count, High power density, and flexibility to operate with a constant pressure burn for high power and constant volume burn for high efficiency is in the concept stage but could prove to be disruptive techno...
|
|
|
|
|
|
Avery Dennison Corporation has developed a labeling system that enables the placement of frangible film on a surface.
|
|
|
|
|
|
Overview This global organization is seeking a low weight material that can replace the heavy weight of steel but withstand the physical and chemical demands of automotive applications.
|
|
|
|
|
|
Overview This global organization is seeking a low weight brake energy storage system for use in smaller commercial vehicles.
|
|
|
|
|
|
OVERVIEW We wish to double (or more) the usable lifetime and performance of professional and industrial cutting tools such as band saws, reciprocating saws, auger bits, HSS drills, hole saws, and blades for circular saws.
|
|
|
|
|
|
OVERVIEW A high degree of hand fatigue results from repetitively using pliers to grip, hold, twist, pull or cut.
|
|
|
|
|
|
The silicone foam must be very light - 0,15 Kilos/cubicmeterThe cells must have very similar sizeThe silicone foam must be very elastic (instant and total shape recovery after deformation)The foam must have a very good water absorption co...
|
|
|
