 |
|
|
-Indoor positioning system utilizing a wireless sensor network has developed and mobile phones are applied to the terminals.
|
|
|
|
|
|
Energy-saving nozzles for spray systems save on operational and capital equipment costs by using lower pressures and less piping while achieving finer mists and better coverage.
|
|
|
|
|
|
Automated surface defect inspection technology from Nissan identifies potential defects on a painted surface so that they can be remedied.
|
|
|
|
|
|
Surnetics has developed technology to move very tiny volumes of liquids without the need for electricity or other external energy source.
|
|
|
|
|
|
Electric vehicles may have more than one source of DC power to deliver to the motor as AC.
|
|
|
|
|
|
By suppressing or controlling harmonic currents and voltages of the motor to overcome torque ripple, this system improves the efficiency and torque performance of an AC motor, especially permanent magnet synchronous motors (PMSM), which a...
|
|
|
|
|
|
This technology gives hard-surface plastics a soft and moist feel at a much lower cost even than ôsoft-feelö paint by imposing a "grain" or texturing onto the surface.
|
|
|
|
|
|
This technology provides a process to produce and the polyester compositions produced that have the desired electrical properties without unduly deteriorating the other valued melt viscosity, processing, and shaped article properties.
|
|
|
|
|
|
An alternative to solenoids and conventional actuators or transducers, this family of advanced technology piezo-electric actuators betters the performance envelope of conventional small step-motors, actuators, transducers, and solenoids b...
|
|
|
|
|
|
Parker-HannifinÆs PACE Hf miniature ultra-high-flow, low-power proportional valves for inert and non-corrosive gases to control other valves and processes downstream, or act as valves in their own right.
|
|
|
|
|
|
- The first successful metal-based high-speed optical scanning devices in the world.
|
|
|
|
|
|
The Evgentech technology allows batteries of various chemistries and sizes to take in power at a much higher rate than existing methodologies, without causing the expected damage seen with conventional accelerated charging paradigms.
|
|
|
|
|
|
- The National Institute of AIST, Japan has succeeded in monitoring power generation of each solar panel by direct current power-line communication.
|
|
|
|
|
|
ParkerÆs Active Pressure Controller (APC) series is a family of compact, modular controllers based on piezo actuator technology.
|
|
|
|
|
|
ZetrOZ LLC builds superior mobile devices for pain reduction and healing.
|
|
|
|
|
|
Utilization of Sensor Data Redundancy - advantageous overall solution through reasonable weighting of partial solutions from reduced systems of equations - formalized analytic solution
|
|
|
|
|
|
-The national institute of AIST in Japan has developed a flexible switchable mirror film that can be electrically switched between reflective and transparent states.
|
|
|
|
|
|
-The national institute of AIST in Japan has developed switchable mirror devices that can be reversibly changed between reflective and transparent states by either exposing gas or applying electricity.
|
|
|
|
|
|
Developed at a Fortune 500 company this technology is a system and method for maintaining the health of an electrical storage device measures revolutions per unit time of an engine shaft of an internal combustion engine, such as those in ...
|
|
|
|
|
|
MoBeam Inc. applies its patented mobile phone-based technology to transform consumer-retail interaction and create multiple layers of value across the entire consumer products and retail industry, with clear benefits to phone manufacturer...
|
|
|
|
|
|
This new methodology of signal-processing enables quick and accurate identification of signal arrival direction.
|
|
|
|
|
|
Airqube is an acoustic technology that lets in fresh air but blocks out 85% of incoming noise.
|
|
|
|
|
|
Copper exposed to air during queuing delays, inevitable in integrated circuit manufacture, develop copper oxide on its exposed surface.
|
|
|
|
|
|
This technology provides a new type of electropolishing process whereby the work piece is physically separated from the electrolyte and cathode by a charge-selective ion-conducting, topographically patterned membrane, and wherein the memb...
|
|
|
|
|
|
Venture Isles client, Personal Flight Systems (PFS), holds one of the most coveted patents in novel science, the patent for manned and unmanned electronic flight.
|
|
|
|
|
|
òHigh light-extraction efficiency is achieved by fabrication of ridges on a semiconductor surface and subsequent deposition of a silicon dioxide (SiO2) layer on the ridges.
|
|
|
|
|
|
Most insulating applications block additional heat transfer by adding more insulation.
|
|
|
|
|
|
This technology comprises fabrication of planar lightwave circuits (PLC's) using dry film photopolymer including pig tailing optical fiber to the formed waveguides.
|
|
|
|
|
|
To meet a need for long-lived semi-conductors, a process has been developed to manufacture alumina-based polycrystalline ceramics.
|
|
|
|
|
|
This innovative hot melt adhesive remains a thermoplastic to a thermoset adhesive good for many applications in the vehicular market, home furnishings, edge binding (banding), and electronics.
|
|
|
|
|
|
This technology is a process for manufacturing electrostatic dissipative (ESD) films from acid copolymers or ionomers that exceed the USA National Fire Protection Association code 556A and the US Military Standard (MIL-81705C) for static ...
|
|
|
|
|
|
This patent portfolio provides 17 issued US patents and associated foreign filings in MEMS (micro-electro-mechanical systems), with priority dates from 1997 to 2005.
|
|
|
|
|
|
The increase in electric power consumption in developed countries is leading to increased exploitage and often overloading of power transmission and electric distribution lines.
|
|
|
|
|
|
Ideal for mobile phone applications, laptop cases, and similar devices that suffer continual minor scratching and abrasion in pocket, backpack, and purse, Slide Ring Material (SRM) paint is able to heal about 80% of surface abrasions by i...
|
|
|
|
|
|
Code 3's TriCore is an LED-based optical lighting technology that is 2X brighter than other technology currently on the market using only 1/3 the power of conventional lighting systems, yielding higher watt-for-watt efficiency.
|
|
|
|
|
|
There is a well recognized need for marking, labeling and identification products such as those used for product tracking and anti-theft applications.
|
|
|
|
Rotating Objects Offers Displays that Mystify the Mind, Synchronized to the Earth's Magnetic Field, Displaying Graphics, Advertising, Flight Data, Rotation Stats, Compass Information. Frisbees, Yo-Yo's, Tops, Boomerangs, Hubcaps, and Industrial Safety.
|
|
How Does it Work?
|
|
|
|
|
|
An unique technology for the damping of impacts that is able to completely control the damping process in a computerized way, reaching maximum efficiency and effectivity.
|
|
|
|
|
|
Any signal can be decomposed into components of sinusoids.
|
|
|
|
|
|
This is a machine for applying self-adhesive roll labels on a variety of cylindrical boxes, containers and tubes.
|
|
|
|
|
|
High-performance visual computing can benefit enterprises running applications with highly parallel code that uses floating-point arithmetic.
|
|
|
|
|
|
This technology provides a method for transferring fragile or thermally sensitive materials using a thermal imaging process for the manufacture of thin film transistors and light emitting devices.
|
|
|
|
|
|
These low-cost thin film transistors have gate, source, and drain electrodes containing about 80% silver, copper, or silver/copper alloy nanoparticles dispersed within specially selected conductive and nonconductive polymers.
|
|
|
|
|
|
The introduction of alkanolamines into semiconductor clean rooms has created the need for this technologyÆs efficient wipes that neutralizes these caustic contaminants and spills during the wiping process.
|
|
|
|
|
|
The High-Security Password System takes the place of strong passwords on digital devices and online services, yet is easy to remember and quick to enter for most individuals.
|
|
|
|
|
|
Para-glycidyloxystyrene (pGS) is produced in a simple one pot, two-step conversion of hydroxycinnamic acid, a raw material derived from renewable resources.
|
|
|
|
|
|
This micro-reinforcement technology enables new applications where existing thermoplastics, elastomers, thermosets, and reinforcing technologies have not had sufficient toughness or fracture strength, particularly at elevated temperatures...
|
|
|
|
|
|
A new atomic force microscopy (AFM) probe unit, called point-contact current-imaging AFM (PCI-AFM)-which combines tapping mode (for mapping topographic image) and point-contact operation (for measuring currentûvoltage characteristics)-has...
|
|
|
|
|
|
Developed originally for color-matching inks on digital printers, MutohÆs suite of spectrometer and spectrophotometer designs and technologies include first- and second-generation devices.
|
|
|
|
|
|
This technology encompasses light emitting diodes that have silyl-substituted pyrenes (an example compound is shown in the figure).
|
|
|
|
|
|
Liquid metal has been used as a coolant for system-level thermal management for decades in nuclear reactors.
|
|
|
|
|
|
Highly pure, single-walled carbon nanotubes (SWNTs) are mass-produced in bulk forms such as vertically aligned ôforestsö through a process we call Super CVD.
|
|
|
|
|
|
Aerosol deposition makes possible the formation of ultrathin ceramic films upon metals or plastics at room temperature.
|
|
|
|
|
|
One broad US patent related to a fast shifting LTCC planar phase shifter suitable for use in a phased array antenna for relatively low cost satellite terminals.
|
|
|
|
|
|
This Smart Built-in-Test Device monitors and acquires fault data induced by environmental stresses (e.g., temperature, vibration), then performs statistical analysis of the fault and environmental stress data to correlate the detected fau...
|
|
|
|
|
|
Many receiving systems, signal generators and their associated test equipment require one or more local oscillators with low phase noise.
|
|
|
|
|
|
Tucana is software comprising a secure, distributed, scalable, native RDF (resource description framework) database.
|
|
|
|
|
|
Most atomic clocks are bench-bound.
|
|
|
|
|
|
Holographic storage products have been available in the commercial market for several years, and the market for these types of products is expected to experience high growth during the term of this portfolio.
|
|
|
|
|
|
In weather, over rough roads, or in heavy seas, removable equipment such as radios, GPS, toolboxes, saddlebags and similar gear must be restrained, held securely in the same position, and rapidly released when needed.
|
|
|
|
|
|
Our breakthrough process produces a highly stable gelling agent that also functions as a dispersant for water or ionic liquids.
|
|
|
|
|
|
The inexpensive nature of these photovoltaic solar controllers allow each cell on a solar panel to have one, rather than have a single controller for two or more cells.
|
|
|
|
|
|
This algorithm has the potential to allow faster image reconstruction without loss of image quality in computed tomography, synthetic aperture radar, and other technologies, which involve reconstruction of a function from its Radon transf...
|
|
|
|
|
|
The present invention relates to the field of acousto-optical scanners, especially those capable of generating fast non-linear scans, and/or fast longitudinal focus scanning.
|
|
|
|
|
|
Since the invention of mode-locked lasers, considerable effort has been directed towards the generation of ultrashort optical pulses.
|
|
|
|
|
|
Experiments with holograms have led to a thin-film flat-plate lens that has a periodic (layered) structure and that is capable of a resolution of 100nm or finer.
|
|
|
|
|
|
Able to withstand abrasion even with steel wool, these anti-reflective coating formulations for display applications offer high durability and reflectivity that ranges from 1.2% down to 0.5%.
|
|
|
|
|
|
This Text to Speech is very flexible and has a small footprint for embedded solutions.
|
|
|
|
|
|
This technology provides an easy and inexpensive method of manufacturing a high-performance piezoelectric element from an aluminum nitride thin film that exhibits no hillocks or cracks, and which does not peel off.
|
|
|
|
|
|
This technology provides the manufacturing process for and the composition of a family of thermally stable polymers having a glycidyl moiety which contains an N-cyclohexyl-aminopropyl trimethoxysilane or other N-alkyl- or N-arylalkylamino...
|
|
|
|
|
|
With over 15,000 clubs, schools and colleges participating in programs across the United States, the sport of wrestling is a sizeable market with a universal problem.
|
|
|
|
|
|
These unique and patented 125kHz RFID tags and readers enable tag information to be read and written through metal.
|
|
|
|
|
|
The Electronic Phone Card« is a patented innovation that addresses the dialing issues related to the standard prepaid phone card.
|
|
|
|
|
|
Metal-ferroelectric-insulator-semiconductor (MFIS) ferroelectric-gate FETs have been under research and development for years because they may make a perfect memory: non-volatile when power is off, non-destructive during readout, speeds a...
|
|
|
|
|
|
Networks of interacting elements must be connected by transmission lines.
|
|
|
|
|
|
The present invention relates to a method and apparatus for performing interference measurements by observation of interference noise.
|
|
|
|
|
|
Most of the chemical elements in nature come as a mixture of isotopes - different versions of the same element with almost indistinguishable chemical and physical properties.
|
|
|
|
|
|
The present invention relates to the field of compression of ultrashort optical pulses.
|
|
|
|
|
|
Metal-ferroelectric-insulator-semiconductor (MFIS) ferroelectric-gate FETs have been under research and development for years because they may make a perfect memory: non-volatile when power is off, non-destructive during readout, speeds a...
|
|
|
|
|
|
A unique cable technology produces measurably cleaner, clearer signals over cables used in audio applications such as electric instruments and audiophile equipment.
|
|
|
|
|
|
3-dimesional high aspect ratio (>500) nano-scale CFx (fluorocarbon) ôtubeö and ôtest-tubeö arrays were realized using Deep Reactive Ion Etching (RIE).
|
|
|
|
|
|
Transparency, chemical resistance, flame resistance, and low moisture absorption make this inexpensive FEP polymer ideal for easy to clean surfaces.
|
|
|
|
|
|
The oxygen generator has been developed to produce large quantities of 100% pure oxygen at low cost.
|
|
|
|
|
|
Providing the capability to identify your objects and persons based on existing FLIR inventory.
|
|
|
|
|
|
A holographic optical device that includes a light-transmissive substrate, a first holographic optical element, and a second holographic optical element that is laterally disposed on the substrate from the first holographic optical element.
|
|
|
|
|
|
The invention relates to methods and apparatus that utilize an electric field, preferably in combination with a thermal and/or electromagnetic field, to create microscopic sub-micron semiconductor devices in a semionic material, at room t...
|
|
|
|
|
|
Existing computer and electronics cases attempt to route cooling air over and around circuit boards, yet motherboards and backplanes enforce circuit board mounting in awkward geometries that cause hot spots and poor air circulation.
|
|
|
|
|
|
This portfolio of technologies applies mid-infrared spectroscopy to the analysis of fluids.
|
|
|
|
|
|
By applying mid-infrared spectroscopy to bodily fluids, this suite of technologies offers the potential for quick, accurate, and inexpensive diagnostic support for variety of diseases in humans or animals.
|
|
|
|
|
|
This technology makes possible Field Emission Displays (FEDs) and Surface-conduction Electron-emitter Displays (SEDs) that can use a variety of less expensive cathode materials and types.
|
|
|
|
|
|
This technology provides a method of laser-drilling any component under the control of real-time feedback to provide for predictable, calibrated fluid flow through one or an array of holes formed in the component.
|
|
|
|
|
|
Developed to ensure a uniform background regardless of the display surface used, the built-in screen uses advanced projector-camera technology that can be incorporated into any projector.
|
|
|
|
|
|
The Integrated Compliance Management System (ICMS)« is a robust, wide-ranging, and flexible suite of browser-deployed software applications that collects data from field personnel using handhelds, integrates it centrally, and uses it to c...
|
|
|
|
|
|
A system that will ring, generate an indentification state, or make a video call to a cell (mobile) phone user when an alarm state is triggered in a vehicle or a building.
|
|
|
|
|
|
Associated technologies permit growing atomic monolayer quantum structures of high purity, uniformity, and controllable size, and producing a high-efficiency light-emitting diode that does not suffer from reflection at the semiconductor/a...
|
|
|
|
|
|
When miniaturizing MOS field-effect transistors (MOSFETs) for their high degree of integration and high speed, a source and a drain come close to each other, and the drain field has an effect on the source.
|
|
|
|
|
|
Introduction of very high concentrations of hollow glass spheres homogenously into a resin during moulding into highly complex functional shapes.
|
|
|
|
|
|
AIST has developed efficient dye-sensitized solar cells (DSSCs) based on novel organic-dye molecules (MK dyes).
|
|
|
|
|
|
Most power MOSFETS (Metal Oxide Semiconductor Field Effect Transistors) users are very familiar with the "static sensitive devices" warning.
|
|
|
|
|
|
The project objective is to develop a portfolio of products for book digitization, to manufacture these products and to prepare to distribute them on the international market.
|
|
|
|
|
|
This invention relates to multigrooved brightness enhancement and light directing films with reduced Moire effects.
|
|
|
|
|
|
Developed for the automotive industry, where the rapid detection of the partial pressure of oxygen is critical to controlling the air-fuel ratio in modern electronic fuel injection systems, this new-type semiconductor resistance sensor of...
|
|
|
|
|
|
The Range TrainerÖ is a radio device for measuring distance.
|
|
|
|
|
|
This technology provides an elegant, efficient and cost effective way to measure absolute position in one or two dimensions using a new Point Coupled Linear Transformer (PCLT).
|
|
|
|
|
|
Microchip controlled Intelligent advanced 8 multi-plug power-splitter with its own prozessor and memory, intern I2C realttime-clock and with unique features, to switch comfortable: direct + timer + master-with individual slave/s.
|
|
|
|
|
|
Speech completion is a novel speech interface function that helps a user enter a word or phrase by completing (filling in the rest of) a phrase fragment uttered by the user.
|
|
|
|
|
|
This GPS-enabled accessory transforms MP3 players like the Apple iPod mobile digital device into location-specific playback devices, suitable for audio tours.
|
|
|
|
|
|
AIST has developed a thin film technology that can reduce the consumption of raw selenium below one-tenth of the conventional standard when manufacturing non-silicon-based CIGS thin-film solar cells.
|
|
|
|
|
|
Aria Analytics, is commercializing a novel analytical technology to characterize liquids for healthcare and industrial applications.
|
|
|
|
|
|
Carbon monoxide (CO) is an important industrial gas, which is widely used in more than 29 industrial applications.
|
|
|
|
|
|
This software makes all details in black&white, color and medical digital images visible, independent of their size or contrast level.
|
|
|
|
|
|
This on demand video transcoding solution revolutionizes the process of quickly converting video into a multitude of file formats.
|
|
|
|
|
|
This technology is a thermoplastic antenna incorporating micron sized conductive fibers within the plastic matrix making it lightweight, corrosion-resistant, and easily fabricated.
|
|
|
|
|
|
This technology is a positioning control apparatus and a precision positioning control method enabling high-precision positioning with high-speed response over a broad range of movement as required in machine tools, semiconductor producti...
|
|
|
|
|
|
METTEX is a new electroplating solution for coating consumable metals that can be used to replace chrome as industrial and decorative coating.
|
|
|
|
|
|
The Environment Purification Materials team of AIST's Synergy Materials Research Center (Japan) has successfully developed and tested significantly improved electrochemical reactors for the selective elimination of nitrogen oxides (NOx) i...
|
|
|
|
|
|
StrobeWiseÖ, in its preferred embodiment, is a patented, microprocessor-based, groundbreaking anti-collision deceleration warning technology developed for motor vehicles.
|
|
|
|
|
|
Using sound waves captured in the inner ear, this technology creates an enhanced method of device control.
|
|
|
|
|
|
Using sound waves generated in the inner ear, this technology creates an enhanced method of wireless voice communications and hands-free device control.
|
|
|
|
|
|
The present invention proposes a process for manufacturing self-aligned transistor where a thermally intolerant material may be used as a material of a gate insulating film and the gate electrode.
|
|
|
|
|
|
A new method for positioning an object in space is proposed in the present invention.
|
|
|
|
|
|
AIST invented a field-effect transistor.
|
|
|
|
|
|
The technology is a field emission device that overcomes the shortcomings of prevalent emission devices.
|
|
|
|
|
|
Computer controlled, programable control interface that allows safe intuitive manual control for motorized vehicles that typically move heavy loads or operate in variable terrain.
|
|
|
|
|
|
CO2 can be separated/removed from a fluorocarbon/CO2 mixture using a semipermeable membrane, eliminating both alkali scrubbing and the potential for introducing new impurities.
|
|
|
|
|
|
The present invention is an information entry device including: keys for information entry; a circular support base on which the keys are mounted concentrically and arranged circularly in order.
|
|
|
|
|
|
A new technology which applies a "grafting" technique to form strong adhesive bonds between mating material surfaces.
|
|
|
|
|
|
Desktop space is precious!
|
|
|
|
|
|
The Board Design Test Vehicle is a method for objective evaluation and qualification of supplier capabilities for the fabrication of a multilayer printed circuit boards.
|
|
|
|
|
|
With just a few clicks on a PocketPC, Delphi PocketChartÖ users can chart patient encounters, write prescriptions, and much more.
|
|
|
|
|
|
Most laptops and many desktop PCs include a provision for wireless connectivity (commonly called "WiFi").
|
|
|
|
|
|
SST (Speaker-Specific Technology) improves the performance of equalized audio systems, particularly lower-end equipment.
|
|
|
|
|
|
Functional and added value coatings and lacquers are big business in the current market, partly driven by todayÆs consumers and professional users placing high demands on products, in areas such as home appliances, components, packaging, ...
|
|
|
|
|
|
This technology has been designed to use a mobile phone, PDA, GPS system (or Tom Tom), MP3 player, IPod, Digital Camera and Digital Video Camera (any handheld device with a digital screen) as a ranger finder.
|
|
|
|
|
|
Add data of any type into standard JPEG images with patented SoundPix, a suite of software, tools, and embedded programming.
|
|
|
|
|
|
Matrix-addressed displays, which includes LCDs, LED and almost every kind of display except the CRT, are currently refreshed on row or one column at a time.
|
|
|
|
|
|
A meter that properly judges the levels of UV in the atmosphere which passes its readings through an electrical box to gather and process the findings in which the results are displayed on a panel that informs the public of current levels.
|
|
|
|
|
|
The formulation and production of electrically conductive polymer composites is described.
|
|
|
|
|
|
A light detector is used during coffee brewing to guarantee the desired strength of the coffee.
|
|
|
|
|
|
The shadow mask is eliminated by replacing it with an electronic control system that guides the electron beams over the correct phosphor lines.
|
|
|
|
|
|
RD&IPÆs redesigned television pixels make it possible to manufacture large-size HDTVs by using cost-effective roll-to-roll printing.
|
|
|
|
|
|
This technology provides a new type of electropolishing process where the work-piece is physically separated from the electrolyte and cathode by a charge-selective ion-conducting membrane that is substantially impermeable to the electroly...
|
|
|
|
|
|
This technology utilizes ozone to remove electrocatalysts from the non-recessed areas of a surface containing recessed and non-recessed areas (integrated circuit), without removing electrocatalyst from the recessed areas.
|
|
|
|
|
|
This instrument is designed for electropolishing metal and alloy (copper, brass, silver, etc.) surfaces, especially surfaces with intricate detail features such as damascene wafers.
|
|
|
|
|
|
Computers and server modules have status indicator LEDs that stay on as long as the machine stays on.
|
|
|
|
|
|
The technology being offered can be used to print sensing or working electrodes in electrochemical biosensor applications.
|
|
|
|
|
|
More thermally stable, safer lithium-ion electrochemical cells with high capacity retention at high discharge rates and long cycle life are the output of this technology.
|
|
|
|
|
|
Appliances, furniture, toys, and especially vehicle interiors have thermoplastic surfaces that require a high quality finish coating.
|
|
|
|
|
|
There is a well recognized need for marking, labeling and identification products such as those used for product tracking and anti-theft applications.
|
|
|
|
|
|
The use of Indium Tin Oxide (ITO) to create display patterns has increased dramatically with the immense popularity of handheld devices, touchscreens and other such products.
|
|
|
|
|
|
This technology enables high speed, extensive evaluation of metal oxide mixtures for electrical properties such as high temperature superconductivity or semiconducting capability.
|
|
|
|
|
|
Using 4 separate cameras, the monitor displays an image of the vehicle from above.
|
|
|
|
|
|
The electrochemical process (ECM = Electrochemical Machining) is a well known process since many years.
|
|
|
|
|
|
This technology comprises an improved waterless printing plate consisting of a sturdy substrate (usually aluminum), and a thin radiation-absorbing layer sandwiched between the substrate plate and a thin hydrophobic layer that (essentially...
|
|
|
|
|
|
DuPont has developed technology for diffusion patterning thick film dielectrics, and has marketed dielectric pastes and imaging pastes using this approach for a number of years.
|
|
|
|
|
|
This technology utilizes additives to organic conducting polymers that enhance adhesion and resolution of printed films while retaining adequate electrical conductivity.
|
|
|
|
|
|
This technology provides a process for laminating a layer of dielectric material onto a semiconductor used for thin film transistor (TFT) arrays in flat-panel displays.
|
|
|
|
|
|
This technology encompasses the synthesis of polycarbonate-clay nanocomposites and their use in a wide variety of shaped articles ranging from glazing applications to housings for electronic equipment.
|
|
|
|
|
|
This technology comprises a device for detecting the location of the interface between two liquids contained within a vessel.
|
|
|
|
|
|
The AFT is the first and only system that actually prevents tampering, illegal filling and decanting of refillable containers thus reduce the incentive to steal the containers.
|
|
|
|
|
|
The tactile perception system is based on human illusion.
|
|
|
|
|
|
This massager provides the best massage orbit for a person's face shape.
|
|
|
|
|
|
PHONE JAM is a new, innovative and exciting social networking tool.
|
|
|
|
|
|
The principal subject for this invention is to provide a drive system for a moveable crossover box that is electrically powered and which is economical to manufacture and convenient to use.
|
|
|
|
|
|
The Torrizo Electromagnetic Accelerator Rail Gun 6000 (TEMAG 6000) is a new innovation in rail gun technology.
|
|
|
|
|
|
The Vector Blind Spot Detector System is a transportation safety device that eliminates the driverÆs blind spot areas.
|
|
|
|
|
|
The YC Hand/Foot Pain Treatment Device includes a treatment chamber, a flexible cuff/bag, and an air treatment device.
|
|
|
|
|
|
New innovative RealStream salt-in-crude analyzer offers real-time online salt content measurement in crude oil without moving parts, sampling systems or chemicals.
|
|
|
|
|
|
The present invention relates to a temporal learning neural network that uses a plurality of temporal neural learning processing elements.
|
|
|
|
|
|
Splash is a revolutionary location-based services (LBS) platform for the delivery of marketing messages, emergency alerts and other content to cell phones and other mobile devices.
|
|
|
|
|
|
Good sleep quality and quantity is important to a healthy life.
|
|
|
|
|
|
A remotely operated stitching device to secure any AAA endovascular graft to the wall of the aorta by inserting a distil stitching device containing staples (see below) activating a balloon to center the device, releasing the staple by us...
|
|
|
|
|
|
Audevision3 is a computer system that has multiple monitors connected to a common CPU.
|
|
|
|
|
|
This system uses existing dedicated and interactive TV cable communications, computers, the Internet for detecting conditions, meters, and alarms and when needed reporting to the appropriate agencies.
|
|
|
|
|
|
Pictures have become increasingly common and popular in mobile communications.
|
|
|
|
|
|
The growth of high-bandwidth wireless networks such as GPRS and CDMA 1X, 802.11, and Bluetooth has created a demand for rich content.
|
|
|
|
|
|
Full color liquid-crystal displays have become very common, in recent years, as flat panel displays.
|
|
|
|
|
|
This silicon proven technology is intended for embedding as software or as a hard-wired System On Chip in digital still & video cameras, mobile phones & PDAs, automotive, security & surveillance, PC/Web cameras and industrial vision.
|
|
|
|
|
|
The system provides an improved temperature control system that will allow for maximum rapid heating during temperature ramp steps yet simultaneously allows for virtually no temperature overshoot or undershoot and will maintain a temperat...
|
|
|
|
|
|
The Need - In PVC wire insulation it is often necessary to apply an outer jacket of polyamide in order to provide chemical resistance, toughness and abrasion resistance.
|
|
|
|
|
|
A television receiver is provided for receiving combination voice/text messages from an external host computer which stores both text and voice information.
|
|
|
|
|
|
This technology relates to a television set having an alpha.
|
|
|
|
|
|
This remote controller includes a menu selector for displaying predetermined menus on a screen according to a menu key and a selection key and inputting a command of selecting a menu, a controller for outputting data corresponding to the ...
|
|
|
|
|
|
This image area indicating circuit includes a laser beam generator for generating laser beams, a reflector for reflecting the laser beams to define a photographing area which includes the object to be photographed, and a controller for co...
|
|
|
|
|
|
This intelligent television receiver receives a signal of a desired channel and displays it on a CRT.
|
|
|
|
|
|
Generating internal horizontal and vertical sync.signals of predetermined frequency levels and displaying self-diagnostic screens representing video component colors and a display status.
|
|
|
|
|
|
This patented technology has been widely employed in various digital audio recorder/player adopting non-volatile semiconductor memory devices since late 1990's.
|
|
|
|
|
|
This patented revolutionary technology was conceived and filed in 1991.
|
|
|
|
|
|
This system is a home automatization technique, and particularly an automatic control method for the power sources of home appliances using the programmed recording function of Video Cassette Recorder(VCR).
|
|
|
|
|
|
To provide an improved color video signal printer capable of high speed printing of color and a high speed color video signal printer capable of printing color images using only one line memory, the present technology contemplates a high ...
|
|
|
|
|
|
As the expanding of LCD application regarding as multimedia field, customer needs rose over sixty (60) inches a large display systems.
|
|
|
|
|
|
Present technology overcomes problems of conventional light out apparatus employing VCSEL (Vertical Cavity Surface Emitted Laser) which is hard to mounted a monitoring photodetector on a semiconductor base because the light of it emits in...
|
|
|
|
|
|
A mobile detection system, comprises a self-propelled movable robot having sensors located thereon, for detecting a fire, gas leak, intruder, or other abnormal condition in a house or an office, and for alerting a central monitor, fire st...
|
|
|
|
|
|
This invention relates to multiprocessors and particularly to systems and methods for coordinating or synchronizing parallel execution of separate program threads.
|
|
|
|
|
|
A novel card read and write process for use in a single card read and write device constructed in a data processing terminal for enabling the card read and write device to access both types of IC card including a smart card and a memory c...
|
|
|
|
|
|
A technique for discriminating a vehicle using the pressures of tires of a vehicle passing on a pair of contact-point boards, which are converted into digital signals by using shift registers, and measures the width of the tires and the d...
|
|
|
|
|
|
This invention relates to a vector processor architecture providing vector registers of fixed size having data elements of programmable size and type.
|
|
|
|
|
|
A speed-variable speech signal reproduction apparatus and method for playing back speech signals stored in a storage medium at an adjusted speed while preventing any degradation in tone or loss of the speech signals from occurring.
|
|
|
|
|
|
A most efficient amine synergist for fast photo-curing of coatings and composites, with the added benefit of very low extractables and yellowing.
|
|
|
|
|
|
Use of this laminate structure allows the user to produce molded plastic parts suitable for producing Class A automotive finishes using an electrostatic spray process.
|
|
|
|
|
|
OVERVIEW This organization wants to find a material that will make cabling fire-retardant.
|
|
|
|
|
|
Many types of food spoilage are slowed when air and moisture are removed from around the food, however currently available solutions are expensive, take up too much space, and require an involved process.
|
|
|
|
|
|
The kitchen is ever changing and it is hard for consumers to always know what food, supplies, ingredients are stored within it at any point in time.
|
|
|
|
|
|
OVERVIEW Seeking a surface treatment for stainless steel that will impart high-release properties on a par with non-stick coatings, but which explicitly is not a coating.
|
|
|
|
|
|
OVERVIEW We are seeking the next generation of home-use and point-of-care (office and clinic use) diagnostic medical technologies and devices.
|
|
|
|
|
|
OVERVIEW Seeking a non-destructive test mechanism to detect fracture toughness, hardness, and microstructure (including different grain structures) properties of steel weld zones.
|
|
|
|
|
|
Flow measurement is predominantly achieved using either Differential Pressure or Thermal / Heat Transfer (e.g. hot bead etc.) techniques.
|
|
|
|
|
|
OVERVIEW This organization needs a sensor that is sensitive and quantitative for methane, ethylene, and acetylene from 5ppm to 5000ppm.
|
|
|
|
|
|
(a) Solar Grid Tie Inverters- GTI 3 Phase(b) Charge Controllers - Solar Charge controller based on MPPT technology integrated with GTI and data logging with remote monitoring facility.
|
|
|
|
|
|
Overview: Our client, a multinational, is seeking to identify liquid processing manufacturing solutions or methodologies which accelerate change-overs between product variants on a process line, with no added waste, and therefore deliver ...
|
|
|
|
|
|
OVERVIEW This organization seeks a non-smoke-producing, non-halogenated fire retardant additive or coating for its polymeric injection-molded electrical connectors in the electrical and electronics industries.
|
|
|
|
|
|
OVERVIEW We're looking for non-halogenated polymeric mix additives for wiring jackets and cables that provide non-smoke fire retardance.
|
|
|
|
|
|
OVERVIEW We are developing new composite materials using core-shell particles - a ceramic, metal, or polymer particle coated with a ceramic oxide shell.
|
|
|
|
|
|
OVERVIEW This organization needs a process for high purity (up to 99.9%) conversion of alpha-aminolactam to lactam and alpha-aminolactone to lactone.
|
|
|
|
|
|
Overview: Our client, a multinational, is seeking to identify spectral filter technologies to operate within a demanding optical environment.
|
|
|
|
|
|
Required Technologies for DEFROST TIMER (Used in Refrigerator), TIMER (Used in Washing Machine) Consumer Durables - Refrigerators & Washing Machines THE TECHNOLOGY SHOULD BE MEET THE LATEST DEVELOPMENTS IN CONSUMABLE DURABLES
Timers ...
|
|
|
|
|
|
Consumers desire perfect dent free packages and properly affixed labels on 3D rigid packaging without noticeable imperfections, wrinkles, or bubbles.
|
|
|
|
|
|
OVERVIEWWe need to determine the exposure/service conditions of a component inside a high pressure gaseous reaction pressure vessel in real time while it is operating at extremely high temperatures and pressures.
|
|
|
|
|
|
Overview: We are seeking new technologies, methods or processes to enable the removal of heavy metals and toxins from waste streams in steel making.
|
|
|
|
|
|
Overview: This company is seeking new, compact technologies, components or entire systems able to be used in image projection applications.
|
|
|
|
|
|
Overview This global organization is seeking a low weight brake energy storage system for use in smaller commercial vehicles.
|
|
|
|
|
|
OVERVIEW We are seeking methods that detect contaminants, microbes, or general cleanliness in the air, on hands, in water, on food, on surfaces, and in similar situations so that consumers and commercial users can clean more thoroughly an...
|
|
|
|
|
|
OVERVIEW This company is seeking a way to disinfect and sanitize hands and surfaces that does not depend on chemicals for bacteria kill, does not involve applying liquid, and does not use UV light.
|
|
|
|
|
|
OVERVIEWWe are seeking a clinically-useful technology with enough sensitivity to assess the microstructure of "spongy" bone that is found in the marrow cavities of whole bones.
|
|
|
|
|
|
OVERVIEW This organization is seeking miniaturized (less than 50lbs) portable equipment to perform magnetic resonance imaging (MRI), computerized tomography (CT), X-ray, and other non-ultrasound diagnostic scans.
|
|
|
|
|
|
OVERVIEW We are looking for a probe-type NH4-N sensor that can stand up to high temperature and pressure (~125 degrees C and 2 atmospheres) during the sterilization step for fermentation, and deliver real-time concentration information du...
|
|
|
|
|
|
OVERVIEW We need to print thin conductive traces on touch-screen substrates, while maintaining good visibility through the screen, and achieving high adherence.
|
|
|
|
|
|
OVERVIEW We are seeking a solder mask that we can print using ink-jet technology.
|
|
|
|
|
|
OVERVIEW This organization seeks printing technology to produce higher-current miniature circuitry.
|
|
|
|
|
|
OVERVIEW This organization needs a weight-saving alternative to sheets, and wires of copper and aluminum that can operate at specific frequencies.
|
|
|
|
|
|
OVERVIEW Everyday hundreds of millions worldwide suffer from pain with a significant proportion of those suffering from persistent pain.
|
|
|
|
|
|
OVERVIEW A high degree of hand fatigue results from repetitively using pliers to grip, hold, twist, pull or cut.
|
|
|
|
|
|
We are looking for a detector array for the infrared region to detect two-dimensional radiation patterns.
|
|
|
|
|
|
Overview Technology is needed to generate a change in the ambience of a given space.
|
|
|
|
|
|
A company wishes to buy US patents in the following general areas: o Digital cameras and imaging, including CCD, low-light imaging, high-speed imaging, non-visible wavelengths, motion/lighting compensation, and automatic focusing.
|
|
|
|
|
|
OVERVIEWThis organization is seeking a method to determine the cloud ceiling height up to at least 3000 feet (ideally up to 20,000 ft), cloud coverage, and visibility up to at least 5 miles using a small, low power automatic sensor.
|
|
|
|
|
|
yet2.com is working on behalf of a large client with an urgent need for technologies that will provide better performance for MOS image sensors (or CMOS image sensors) used in camera applications.
|
|
|
|
|
|
This organization, represented by yet2.com, seeks to purchase US patents that cover many aspects of MIMO (Multiple-Input/Multiple-Output) technologies.
|
|
|
|
|
|
yet2.com is working on behalf of a large client with an urgent need for technologies that is seeking to purchase or to exclusively license US patents that can help overcome some inherent difficulties in using MOS/CMOS image sensors in cam...
|
|
|
|
|
|
We are seeking to purchase or to exclusively license US patents that offer substantial improvements to LCOS (liquid crystal on silicon) rear-projection television and its applications.
|
|
|
|
|
|
We are seeking to purchase or to exclusively license US patents that bear on improving the performance of LCOS (liquid crystal on silion) panels.
|
|
|
