 |
|
|
Finger seals are non-contact fluid seals similar in purpose to labyrinth or brush seals in that they act as a barrier between two areas of the same or different pressures, but allow a rotating shaft to penetrate through them from one side...
|
|
|
|
|
|
Over five decades of operating experience are captured in the distributed control system for manufacturing monomethylformamide (MMF) and dimethylformamide (DMF).
|
|
|
|
|
|
Developed for the automotive industry, where the rapid detection of the partial pressure of oxygen is critical to controlling the air-fuel ratio in modern electronic fuel injection systems, this new-type semiconductor resistance sensor of...
|
|
|
|
|
|
This technology provides an elegant, efficient and cost effective way to measure absolute position in one or two dimensions using a new Point Coupled Linear Transformer (PCLT).
|
|
|
|
|
|
This technology selectively separates fines and small particles that have a desired particle size range by using the particlesÆ specific gravity and their various sedimentation rates in a rotating vessel of vibrating liquid.
|
|
|
|
|
|
One of the most important attributes of coatings on substrates is the adhesion of the coating to the substrate.
|
|
|
|
|
|
Over more than 100 years of technology development resulted in high speed, low cost web coating technology to apply multiple functional thin layers on different substrates, such as PVC, PC, PET, Cellulose triacetate, PE-paper or other tre...
|
|
|
|
|
|
An efficient commercial method of continuously producing a lactam in a reaction field of high-temperature, high-pressure water has been developed.
|
|
|
|
|
|
AIST has developed a thin film technology that can reduce the consumption of raw selenium below one-tenth of the conventional standard when manufacturing non-silicon-based CIGS thin-film solar cells.
|
|
|
|
|
|
A food grade, organic compliant, non toxic, non allergenic, non hazardous and completely biodegradable anti-microbial product has been developed that also acts as natural food safe preservative.
|
|
|
|
|
|
The search for a transparent magnetic substance that is easy to manufacture has been ongoing for many years.
|
|
|
|
|
|
Carbon monoxide (CO) is an important industrial gas, which is widely used in more than 29 industrial applications.
|
|
|
|
|
|
A new method has been developed to provide a significant improvement to the processing of fish through a unique gas treatment method, resulting in a reduction in treatment time and an enhanced penetration of fish with the treatment gas.
|
|
|
|
|
|
The focus of this technology is the ability of yeast to reversibly open up the junctions between cells to aid drug delivery.
|
|
|
|
|
|
The Spherical Golubev Machine (SGM) is a revolutionary technology for the design and production of positive-displacement machines such as compressors, expanders, pumps, motors, engines and the like.
|
|
|
|
|
|
This new patented technology enables the integration of passive components into the printed circuit board (PCB).
|
|
|
|
|
|
This technology features a uniquely designed suction head that eliminates problems typically experienced in alluvial diamond mining, mud, sewerage pumping or dredging operations.
|
|
|
|
|
|
The Gage SystemÖ is a patented method of constructing a brick or block wall using a mortar delivery device and a block alignment panel.
|
|
|
|
|
|
The Nelson Extrusion is an apparatus designed to inlay detailed images using a wide range of materials including food products, plastics, cosmetics, and soaps.
|
|
|
|
|
|
This technology is a positioning control apparatus and a precision positioning control method enabling high-precision positioning with high-speed response over a broad range of movement as required in machine tools, semiconductor producti...
|
|
|
|
|
|
This technology makes rapidly-disintegrating, water-dispersible granules using heat-extrusion.
|
|
|
|
|
|
This technology makes rapidly-disintegrating, water-soluble or water-dispersible granules using heat-extrusion.
|
|
|
|
|
|
This technology creates uniformly-sized granules with minimal loss from cylindrical particles with a wide length distribution.
|
|
|
|
|
|
Hebberd Dynamic Simulation Software (HDSS) A patented method that is specifically designed for analyzing and forecasting equipment components that are routinely replaced.
|
|
|
|
|
|
This patented method and related stand alone software for predicting springback in hydroformed sheetmetal parts, referred to as Springback CalculatorÖ, has resulted in a reduction in tool development time, savings in tooling costs, reduct...
|
|
|
|
|
|
This technology provides a method of laser-drilling any component under the control of real-time feedback to provide for predictable, calibrated fluid flow through one or an array of holes formed in the component.
|
|
|
|
|
|
This suite of broadly applicable laser machining and related control technologies was originally developed to improve high-volume laser fabrication of precision machine parts.
|
|
|
|
|
|
This patented surface contamination detection system enables accurate, automated, in-line inspection of metallic and composite panels prior to bonding, coating, painting or welding operations.
|
|
|
|
|
|
The present technology describes the method for the production of the zeolite membrane.
|
|
|
|
|
|
A method of non-contact micromanipulation using ultrasound is proposed in this invention.
|
|
|
|
|
|
In this technology, methods of solidifying low-boiling-point hydrocarbon and gaseous hydrocarbons are proposed.
|
|
|
|
|
|
The present invention relates to an optical micro-machining method of glass.
|
|
|
|
|
|
The present invention proposes a process for the production of a hydrogen gas from water wit reduced costs.
|
|
|
|
|
|
The present invention relates to a gauge for calibrating a three-dimensional coordinate measuring machine (CMM).
|
|
|
|
|
|
The technology is an input assisting device for CAD operation.
|
|
|
|
|
|
DuPont has successfully developed novel technology for enhanced polymer processing.
|
|
|
|
|
|
A low leakage rotary valve composes of a housing, a rotor, a driving end valve cover and a washing end valve cover.
|
|
|
|
|
|
Rapid solidification rate (RSR) technology enables production of fine-grained (nanometer-scale) and amorphous metals with uniform chemistry.
|
|
|
|
|
|
AIST proposes a method using hydrogen-occluded alloy for recovering power from waste heat.
|
|
|
|
|
|
It relates to a non-contact continuous photoelectric device for detecting paint coating contamination on welding seams of steel can sheet.
|
|
|
|
|
|
AIST proposes a unique method for the preparation of a body of an austempered ductile cast iron (ADI) having a gradient of the mechanical properties within the body along with excellent toughness and strength suitable as a substitute mate...
|
|
|
|
|
|
Fast-Flo? is a cordless hand-held fluid transfer device designed to transfer pharmacological fluids/solutions from a storage vessel into a receiving vessel using a disposable syringe and needle and other attachments typical of the applica...
|
|
|
|
|
|
A method and apparatus for providing a steam boiler/combuster and gasifier that uses a primary dirty fuel, such as waste materials, or high-polluting fossil fuels, and a secondary low-polluting fuel, such as biomass fuels for co-generatio...
|
|
|
|
|
|
Steam generator of an electromagnetic induction type includes: a conduit, which provides a passageway of generated steam, a superheating tank, which is part of the conduit midway through the conduit, a coil, which is disposed around the s...
|
|
|
|
|
|
AIST proposes a two finger micromanipulator for use in biotechnology, medicine, and various industrial fields in which micromanipulation is required.
|
|
|
|
|
|
This technology relates to a micromotion stage for use as a positioning mechanism in devices for fine positioning of objects, semiconductor production equipments, printing machines, scanning-tunneling microscopes and other such precision ...
|
|
|
|
|
|
Our technology lets sprinkler manufacturers provide their customers with new user benefits that they want and desire -- and provides them with major competitive advantages.
|
|
|
|
|
|
In addition to the traditional uses as ornamental or decorative articles, gold is widely used in various industries as a wiring material of electronic circuits in electronic industries or as a catalytically active ingredient in certain ca...
|
|
|
|
|
|
This technology enables the use of dramatically less expensive flooded screw compressors instead of precision fit dry compressors.
|
|
|
|
|
|
The device allows the perfect alignment of vertically positioned sheets or plates.
|
|
|
|
|
|
This technology allows to obtain continuous tone, photographic images with electrostatic toner.
|
|
|
|
|
|
This is a contact-less measuring technique, simple in composition yet featuring second order angular measurement precision.
|
|
|
|
|
|
The only technology of its kind, the Atomic Penetratioin of Materials (APM) technology diffuses the atoms from superior metal(s) and implants them into the interstitial spaces of surface molecules of existing metal parts, creating patenta...
|
|
|
|
|
|
Intellimold is a proven, practical real-time process control method for use in injection molding operations.
|
|
|
|
|
|
Individuals seeking information on the Internet or in large document databases typically use a search engine to search for keywords contained within a web page or document.
|
|
|
|
|
|
Reduce inventory carrying costs and reduce IT system development and maintenance costs with IntelliQuence shop-floor-sequencing software from Textron.
|
|
|
|
|
|
We have satisfied the contradicting requirements to simultaneously achieve high-precision transfer while reducing manufacturing cycle time.
|
|
|
|
|
|
This proven, commercialized "Toolkit" facilitates quick development of Honeywell Communications Interface (HCI) and OPC compliant servers.
|
|
|
|
|
|
This technology describes the manufacture of multi-layer solid surface materials comprised of a thin layer of filled polymer integrally formed with a backing of bubble-filled polymer using one-step casting.
|
|
|
|
|
|
Honeywell's proprietary Redirection Manager (RDM) automatically redirects OPC client calls to another OPC Server if the Primary Server should fail.
|
|
|
|
|
|
Honeywell's proprietary Sign-On Manager software for Total Plant Solutions (TPS) client applications performs security checks for a "user" other than the current user.
|
|
|
|
|
|
Honeywell's unique, commercialized technology is suitable for fiber optic surface reflectivity (gloss) measurements.
|
|
|
|
|
|
During its 60 year history of mononitrobenzene(MNB)/aniline production, DuPont has continuously refined and optimized the process technology of this offering, particularly in the areas of process yields, energy consumption, waste minimiza...
|
|
|
|
|
|
Honeywell's novel design for an optical liquid level sensor eliminates the need for encapsulation material to seal the light source, detector, and associated wire bonds within the assembly.
|
|
|
|
|
|
Honeywell's inventive magnetic geartooth sensor and associated circuit determines a threshold value as a function of the minimum and average output values from a sensor output.
|
|
|
|
|
|
Honeywell has developed a practical, efficient method for cleaning residual submicron residue from the surface of semiconductor wafers after chemical-mechanical planarization (CMP).
|
|
|
|
|
|
The potential hazards for handling of powders include toxicity and explosion, both of which need to be prevented.
|
|
|
|
|
|
An improved ASIC (Application Specific Integrated Circuit) for use in industrial proximity sensor applications provides ease of programmability, embedded trimming capability, and dual slope temperature compensation.
|
|
|
|
|
|
Honeywell has developed a unique method to produce rocket nozzles with the capacity to withstand the higher combustion temperatures required by today's rocket propulsion industry.
|
|
|
|
|
|
This patented technology improves efficiency and throughput to equipment suppliers and end users alike who spray or extrude fluids of all types through nozzles; utilizing ultrasonic energy in a unique nozzle configuration, end users gain ...
|
|
|
|
|
|
Honeywell offers an innovative load driver circuit which achieves both high efficiency and fault tolerance.
|
|
|
|
|
|
When sheet or film material needs to be processed in a liquid, it needs to be guided through the apparatus.
|
|
|
|
|
|
The design allows the processing of a sheet or film in one or more liquid treatment chambers that can be connected for serial passage of the material.
|
|
|
|
|
|
This apparatus allows the continuous treatment or processing of sheet material under reduced pressure in a convenient and reliable way.
|
|
|
|
|
|
New innovative RealStream salt-in-crude analyzer offers real-time online salt content measurement in crude oil without moving parts, sampling systems or chemicals.
|
|
|
|
|
|
Proposed is an efficient method for the highly selective recovery of silver value in an aqueous solution containing silver ions in a low concentration, such as depleted photographic fixing solutions, by extracting the silver ions from the...
|
|
|
|
|
|
This invention is a structural improvement to the conventional kidney dialysis machine.
|
|
|
|
|
|
HVACR technicians who service AC and refrigeration equipment routinely deal with bulky and heavy scales to measure the in- and out-take of refrigerants.
|
|
|
|
|
|
Indexing multiple machine tools is expensive, cumbersome and problematic.
|
|
|
|
|
|
The Crack TrackerTM System has been developed for crack routing, including the Crack TrackerTM Crack sealer, which is in development to be released in the near future.
|
|
|
|
|
|
Low cost smart monitoring system installation on an aerosol can or other sealed metal containers.
|
|
|
|
|
|
A Patented, highly cost effective quick fit method for connecting pipes which does not require heavy molded fittings or specialized tools.
|
|
|
|
|
|
This technology, designed for continuous manufacturing processes, provides a method and apparatus for agitation-free, low temperature drying of fragile, temperature sensitive, granular materials.
|
|
|
|
|
|
This instrument measures particle size distribution, in situ, in slurries, from dilute to highly concentrated.
|
|
|
|
|
|
This patent provides an apparatus and a method of tensioning a flat web of material to be conveyed, of the kind set forth in the opening part of this specification, which permits tensioning of When conveying flat webs of material, a probl...
|
|
|
|
|
|
This quantitative testing device measures the sprayability of a dispersion under conditions found in commercial practice.
|
|
|
|
|
|
Higher operating speed, improved dye and ink receptivity, better resolution, and avoidance of messy chemical processing in paper manufacture are key benefits of this technology.
|
|
|
|
|
|
Simple to fabricate, assemble and clean, this novel mold-fill coupling design is ideal for automated filling of polymer casting molds.
|
|
|
|
|
|
Genarally : Injection molding is generally used for the production of thermoplastic products.
|
|
|
|
|
|
We are looking for ideas, and solutions to pack unitized doses (~30-40ml of liquid detergent) in a controlled fashion without having to invest large amounts of capital in quality control.
|
|
|
|
|
|
The silicone foam must be very light - 0,15 Kilos/cubicmeterThe cells must have very similar sizeThe silicone foam must be very elastic (instant and total shape recovery after deformation)The foam must have a very good water absorption co...
|
|
|
|
|
|
OVERVIEW Technology is required to enable "in-process" or real-time detection of defects during the welding process.
|
|
|
|
|
|
We are looking for a solution able to produce bended profiles with variable and as small as possible bending radious.
|
|
|
|
|
|
Several dyestuffs intermediate units are generating spent sulfuric acid of 18-20% concentration.
|
|
|
|
|
|
Machinable wax is often used to make prototype parts with the advantage of obsolete objects and machined away chips simply being melted down to create new raw material.
|
|
|
