 |
|
|
Introduction of very high concentrations of hollow glass spheres homogenously into a resin during moulding into highly complex functional shapes.
|
|
|
|
|
|
This technology enables polymers with a superior narrow molecular weight distribution for use in powder coatings.
|
|
|
|
|
|
PHS and copolymers have wide ranging applications including, for example, photoresists, varnishes, and printing inks.
|
|
|
|
|
|
This low temperature curable barrier coating is suitable for almost all polymeric films, sheets, and shapes.
|
|
|
|
|
|
The Kinesthotic® orthotic footbed supports and dynamically adapts to the continuously changing shapes of the weight-bearing soles of each foot and according to the Kinetic dynamics of each activity.
|
|
|
|
|
|
DuPont's Vinyl Acetate Monomer (VAM) manufacturing process is a safe and reliable process for producing high quality finished product.
|
|
|
|
|
|
This technology allows the user to custom tailor polymers for specific end-uses.
|
|
|
|
|
|
This technology provides improved cavity design, nozzle design, and motive fluid nozzle design to dramatically increase the efficiency of particle size reduction in fluid mills.
|
|
|
|
|
|
Developed for the automotive industry, where the rapid detection of the partial pressure of oxygen is critical to controlling the air-fuel ratio in modern electronic fuel injection systems, this new-type semiconductor resistance sensor of...
|
|
|
|
|
|
This technology provides an elegant, efficient and cost effective way to measure absolute position in one or two dimensions using a new Point Coupled Linear Transformer (PCLT).
|
|
|
|
|
|
This highly flexible C6 perfluoroalkyl formulation overcomes the environmental issues inherent in other perfluoroalkyl tails, and imparts non-stick properties and resistance to oil, grease, solvents, or water that are similar to C8 fluoro...
|
|
|
|
|
|
AIST has developed a thin film technology that can reduce the consumption of raw selenium below one-tenth of the conventional standard when manufacturing non-silicon-based CIGS thin-film solar cells.
|
|
|
|
|
|
The search for a transparent magnetic substance that is easy to manufacture has been ongoing for many years.
|
|
|
|
|
|
The focus of this technology is the ability of yeast to reversibly open up the junctions between cells to aid drug delivery.
|
|
|
|
|
|
Powder coated aluminum is used extensively for decorative and functional items such as mailboxes, porch banisters, etc. that are commonly subjected to the weather.
|
|
|
|
|
|
This product is the most efficient concrete waterproofing solution available today.
|
|
|
|
|
|
AIST has developed a large-scale synthetic method of producing imogolite from inexpensive inorganic materials.
|
|
|
|
|
|
This innovative hot melt adhesive cures to a thermoset adhesive good for many applications in the vehicular market, home furnishings, edge binding, and electronics.
|
|
|
|
|
|
This technology is a thermoplastic antenna incorporating micron sized conductive fibers within the plastic matrix making it lightweight, corrosion-resistant, and easily fabricated.
|
|
|
|
|
|
This technology comprises know-how that DuPont has developed and commercialized into a unique manufacturing technology that can be used with a wide variety of nonwoven fabrics and is especially suitable for creating cross-directional soft...
|
|
|
|
|
|
Light and recyclable magnesium alloy has been drawing attention and is widely used for practical purposes such as mobile electronic equipment and vehicles.
|
|
|
|
|
|
The Environment Purification Materials team of AIST's Synergy Materials Research Center (Japan) has successfully developed and tested significantly improved electrochemical reactors for the selective elimination of nitrogen oxides (NOx) i...
|
|
|
|
|
|
AIST researchers have developed a thin film alloy of magnesium and titanium that, when applied to glass, may be easily switched between a reflective and transparent state.
|
|
|
|
|
|
The technology is a method to produce glass material with a promising negative refractive index.
|
|
|
|
|
|
The present technology describes the method for the production of the zeolite membrane.
|
|
|
|
|
|
The present invention relates to an optical micro-machining method of glass.
|
|
|
|
|
|
The present technology proposes a tricalcium-phosphate-based prosthetic material, which is a sintered ceramic body mainly consisting of tricalcium phosphate containing a limited amount of zinc.
|
|
|
|
|
|
The present invention relates to the manufacturing process of a high-temperature ceramics-based composite material, which features excellent heat and oxidation resistance and frictional properties.
|
|
|
|
|
|
The technology is a method of manufacturing metallic materials based with extremely fine crystal grain sizes via continuous stimulation during solidification.
|
|
|
|
|
|
The technology is a method to produce primary material, specifically glass, with refracting capabilities that may be applied to uses beyond conventional fiber optics.
|
|
|
|
|
|
The technology is an input assisting device for CAD operation.
|
|
|
|
|
|
When producing cucurbit plants like water melons, the strips of soil containing the plants, are covered with a plastic sheet.
|
|
|
|
|
|
The present invention shows the superconductive magnetic levitation transportation system with high-efficiency and large-capacity utilizing potential energy as the drive source, which performs short to long distance transportation of carg...
|
|
|
|
|
|
The present invention relates to a process for producing fiber-reinforced silicon carbide composites, which are suitable for a variety of applications requiring improved toughness, such as aerospace high-temperature structural members, ga...
|
|
|
|
|
|
The flame retardant compounds for cotton, polyester, acrylic fibers, and polypropylene of this technology have high efficacy documented in extensive test results.
|
|
|
|
|
|
Process for making self-supporting conductive films for electrical applications, such as packaging for transporting electrical components and static dissipating laminates for critical work benches and clean room environments.
|
|
|
|
|
|
Novel condensation polymers have been prepared by the copolymerization of a N,N*-disubstituted disulfonamide with an organic acid dihalide such as dicarboxylic dichloride,disulfonic acid dichlorides, bic chloroformates, phosgene, diisocya...
|
|
|
|
|
|
A new technology was recently patented that opens the door for commercial production of all woven nanofiber applications.
|
|
|
|
|
|
Rapid solidification rate (RSR) technology enables production of fine-grained (nanometer-scale) and amorphous metals with uniform chemistry.
|
|
|
|
|
|
AIST proposes a unique method for the preparation of a body of an austempered ductile cast iron (ADI) having a gradient of the mechanical properties within the body along with excellent toughness and strength suitable as a substitute mate...
|
|
|
|
|
|
The ADCA is not only a step in the right direction; it's a revolutionary new concept in aerial delivery system.
|
|
|
|
|
|
Fast-Flo? is a cordless hand-held fluid transfer device designed to transfer pharmacological fluids/solutions from a storage vessel into a receiving vessel using a disposable syringe and needle and other attachments typical of the applica...
|
|
|
|
|
|
The invention is an apparatus for controlling the amount of solar energy and heat transferred into and out of a building or other structure through a glazed opening using a system of pneumatically actuated, reflective shutters.
|
|
|
|
|
|
A new technology which applies a "grafting" technique to form strong adhesive bonds between mating material surfaces.
|
|
|
|
|
|
AIST for the first time provides a method for producing an alcohol, a ketone, and an epoxide by the oxidation of a hydrocarbon with oxygen in the presence of a reducing agent.
|
|
|
|
|
|
The invention relates to an organometallic zeolite which is formed of a multiplicity of units, each of which is of the formula (X.M).sub.m, wherein M is a metal ion selected from the group consisting of Ni.sup.2+, Sn.sup.2+, Mg.sup.2+, Ca...
|
|
|
|
|
|
This technology relates the production optical carbonhydrates, employing D-glucose as the starter reactant and transfer it into L-sugars and derivatives with easy steps.
|
|
|
|
|
|
This technology relates to a method for the preparation of vitreous hollow microspheres with a photocatalytic activity from a vitreous volcanic deposit as the starting material.
|
|
|
|
|
|
In addition to the traditional uses as ornamental or decorative articles, gold is widely used in various industries as a wiring material of electronic circuits in electronic industries or as a catalytically active ingredient in certain ca...
|
|
|
|
|
|
This ultrasonic echo apparatus can measure tissue inside living bodies, non-invasively.
|
|
|
|
|
|
Antistatic properties are given to a plastic film or resin coated paper by coating it with a layer containing a conductive polymer, PEDOT/PSS (polyethylene-dioxy-thiophene/ polystyrene sulphonic acid).
|
|
|
|
|
|
AIST is seeking an opportunity of a technology transfer and a patent licensing, regarding this SiC three-dimensional filter.
|
|
|
|
|
|
This technology relates to a deodorizing lamp and method for the production of the lamp.
|
|
|
|
|
|
This technology relates to a photocatalyst sheet useful for purifying the living environment, being able to decompose and remove malodorous substances, harmful substances in the air, and prevent developing of bacterium and fungi.
|
|
|
|
|
|
AIST produced a silicon nitride sinter exhibting extremely high strength and toughness in a specific direction.
|
|
|
|
|
|
Weldbonding is a joining process that combines laser spot welding with adhesives.
|
|
|
|
|
|
TTIR (Through-Transmission Infrared Welding) transmits wavelengths of light , either laser or halogen lamp generated, through one of the materials to the second.
|
|
|
|
|
|
A tamper-free identification card is obtained by laminating two foils together that hold the photograph of the bearer and that are chemically cross-linked to ensure the integrity of the identification card.
|
|
|
|
|
|
Functional and added value coatings and lacquers are big business in the current market, partly driven by todayÆs consumers and professional users placing high demands on products, in areas such as home appliances, components, packaging, ...
|
|
|
|
|
|
The dosimeter described here allows the quantitative detection of radiation with a wavelength shorter than 350 nm (UV light, X-ray and radioactive radiation).
|
|
|
|
|
|
This technology provides an improved apparatus design and process for reducing, dispersing, wetting and mixing pumpable, non-magnetic multiphase mixtures.
|
|
|
|
|
|
Liquid crystal polymers (LCP's) represent a growing family of high performance engineering polymers.
|
|
|
|
|
|
Liquid Crystal Polymers (LCP's) are superb for making highly detailed, high performance parts such as microcircuit boards or electronic connectors.
|
|
|
|
|
|
Aromatic dicarboxylic acids such as 2,6-naphthalene dicarboxylic acid are important intermediates in the preparation of high performance engineering polymers.
|
|
|
|
|
|
This is a platform technology which combines an elastomeric polymer modified bitumen binder with scrap tyre granulate (rubber crumb) and aggregate material from either waste and or virgin materials.
|
|
|
|
|
|
The new technology makes it possible to dye different Materials by the dye sublimation process.
|
|
|
|
|
|
This technology introduces an electron blocking layer between the two electrodes of a photoactive electronic device such as a solar cell.
|
|
|
|
|
|
A highly innovative all oxide fiber, reinforced ceramic matrix composite for extreme high temperature applications.
|
|
|
|
|
|
This technology enables the economical production of inorganic light emitting diodes (ILEDs) starting from precipitated ZnS nanoparticles, undoped or doped.
|
|
|
|
|
|
The only technology of its kind, the Atomic Penetratioin of Materials (APM) technology diffuses the atoms from superior metal(s) and implants them into the interstitial spaces of surface molecules of existing metal parts, creating patenta...
|
|
|
|
|
|
GOREÖ DRP« Diffuse Reflector is an expanded PTFE material that offers reflectance optimally approaching 100%.
|
|
|
|
|
|
New process technology to treat polyester yarn with an aziridine compound provides improved bond strength--especially to rubber particles.
|
|
|
|
|
|
A wide range of applications requiring carbon black of exceptional dispersibility can benefit from this unique surface treatment for carbon black particles.
|
|
|
|
|
|
This unique extraction and purification technology offers a Green, nature-based solution to pesticides.
|
|
|
|
|
|
Carbon-fiber reinforcement in laminate structures has resulted in great improvement in tensile strength, but much-less-than-theoretical improvement in compressive strength.
|
|
|
|
|
|
This technology provides a method of controlling the rigidity of non-conductive fibers, especially aramid fibers, using DLC coatings.
|
|
|
|
|
|
The Air Conditioned Helmet, (ACH), is the only truly practical and functional air conditioned helmet design in the world.
|
|
|
|
|
|
This technology is a method for modifying poly(ethylene oxide) (PEO) and is intended to impart melt processability so that the modified PEO may be drawn into thin films and fine fibers.
|
|
|
|
|
|
This is an ordinary film that can be customized to have different surface characteristics from silk-like to rough, and that can be adjusted for fluid handling characteristics to vary absorption and rewet.
|
|
|
|
|
|
This innovative technology provides resiliently deformable, low cost packages that exhibit a strong tendency to self-restore; they are easy to produce and fill and can undergo numerous deformation cycles between successive sheet dispensin...
|
|
|
|
|
|
This technology describes the manufacture of multi-layer solid surface materials comprised of a thin layer of filled polymer integrally formed with a backing of bubble-filled polymer using one-step casting.
|
|
|
|
|
|
This personal water disinfection technology means that potable water (that is, water fit to drink) can be made available to anyone, anywhere in the world, without the need for a bulky or heavy purification system.
|
|
|
|
|
|
During its 60 year history of mononitrobenzene(MNB)/aniline production, DuPont has continuously refined and optimized the process technology of this offering, particularly in the areas of process yields, energy consumption, waste minimiza...
|
|
|
|
|
|
DuPont's process technology for the production of acrylonitrile (ACRN), based on over 40 years of refinement and optimization, has a demonstrated history of improved product quality, higher operating efficiency and reduced capital cost.
|
|
|
|
|
|
As feature sizes for integrated circuits become smaller, the demand for improved dielectric films continues to grow.
|
|
|
|
|
|
More uniform and rapid quenching and coagulation of m-phenylene isophthalamide fibers is achieved by generating pressure fluctuations in the coagulating liquid at ultrasonic frequencies.
|
|
|
|
|
|
This technology is directed at producing fibrous composite sheets or web products that incorporate uniformly distributed particulate materials within these substrates and that offer a wide range of enhanced properties or attributes; for e...
|
|
|
|
|
|
Application of this high speed folding technology can provide increased profits from efficiency-based cost reductions and improved product quality, and potentially reduced capital investment for new systems because of its compact size; un...
|
|
|
|
|
|
Honeywell has developed a new family of high boiling point, benign organic solvents for the manufacturing, processing and application of spin-on dielectric polymer solutions and an improved process for producing low dielectric films.
|
|
|
|
|
|
This broad technology provides for preparation and use of polymers with thermally reversible bonds, allowing melt processing such as injection molding, melt spinning, and film extrusion processing that was not possible before; thus, costl...
|
|
|
|
|
|
These unique technologies provide low cost methods that significantly improve odor reduction in a variety of disposable personal absorbent products used for containment of bodily exudates; products such as diapers, training pants, sanitar...
|
|
|
|
|
|
The process offered here enables the manufacture of plastic parts with smooth skins and foamed cores.
|
|
|
|
|
|
Fire retardant effectiveness of melamine systems in nylon are improved by the technologies offered here.
|
|
|
|
|
|
Maintaining a uniform web is a significant challenge in the manufacture of stretchable materials.
|
|
|
|
|
|
A freshly vacuum deposited metal layer is immediately protected under vacuum by laminating a protective resin layer in the same environment.
|
|
|
|
|
|
CATI owns the patents and know-how covering bio-adhesives including swellable bio-adhesive hydrogels, which can be prepared as a thin, clear, tacky layer on an inert substrate, making it particularly useful in biomedical products.
|
|
|
|
|
|
The Torrizo Electromagnetic Accelerator Rail Gun 6000 (TEMAG 6000) is a new innovation in rail gun technology.
|
|
|
|
|
|
Licensees of this sodium manufacturing cell technology will enjoy higher current efficiencies (~4%), 30% lower calcium chloride fed to each cell, and labor force reduction of ~30% relative to standard DowÆs cell operation.
|
|
|
|
|
|
DuPont has successfully developed a less complex, lower cost electrochromatic (EC) technology for controllable light transmission in automotive and architectural safety glazing applications.
|
|
|
|
|
|
This hot melt polyurethane (PUR) formulation is resistant enough to premature polymerization from humidity to allow long term storage, even of individual parts coated with the PUR adhesive prior to pasting.
|
|
|
|
|
|
This technology provides a polyurethane hot melt adhesive with superior properties over a wide temperature range--- after curing, the adhesive has high heat stability and also does not become brittle under low temperature conditions.
|
|
|
|
|
|
Proposed is a novel synthetic inorganic porous material having a chemical composition of the general formula [(SiO2)8 ?(MO2/3)a ?(OH)2/3a+b ]b- ?b/c(Ac+), in which M is an ion of a divalent metal, e.g., Mg, A is a cation of an alkali meta...
|
|
|
|
|
|
Proposed is an efficient method for the highly selective recovery of silver value in an aqueous solution containing silver ions in a low concentration, such as depleted photographic fixing solutions, by extracting the silver ions from the...
|
|
|
|
|
|
This invention relates to silica particles modified by at least one type of organic group and provides this with a low cost and easy process.
|
|
|
|
|
|
This technology is a range of compositions, their synthesis methods, and application method for a clear coating composition comprising isocyanate, silane and melamine components wherein said isocyanate component comprises an aliphatic pol...
|
|
|
|
|
|
The Aircraft Landing/Taxiing Guidance System is the revolutionary new inexpensive tool for safer and accurate landing of todayÆs many different aircraft.
|
|
|
|
|
|
This technology produces non-stick surfaces with an intriguing appearance of natural stone --- suitable for cookware, kitchen and bath counter tops, and wall coverings.
|
|
|
|
|
|
Flexible gas tight film "Claist" is prepared by a compact lamination of clay platelets of thickness around 1 nanometer each.
|
|
|
|
|
|
1. Described is a sputtering target assembly of high purity copper diffusion bonded to a precipitation hardened aluminum alloy backing plate via an intermediate layer of a CuCr alloy and in which the copper contains a micro alloy addition...
|
|
|
|
|
|
The patent fortfolio includes applications of silicon oxycarbide black glass on (A) producing fiber, (B) ceramic matrix composites, and (C) as an oxidative-resistant coating on carbon-carbon composite.
|
|
|
|
|
|
The present invention provides an external lubricant composition for lead stabilized vinyl polymer.
|
|
|
|
|
|
Water soluble nylons offer environmentally friendly coating solutions with no volatile solvents.
|
|
|
|
|
|
The use of a peelable release layer during the extrusion coating of a substrate allows a thin layer of a low viscosity polymer to be successfully applied.
|
|
|
|
|
|
A three layer semi-permeable membrane structure for use in textile applications, consisting of a hydrophilic inner layer and hydrophobic exterior layers of copolyetherester elastomer films, leads to an enhanced lifetime breathable waterpr...
|
|
|
|
|
|
TIM has been designed and intended for: ò thermal insulation of refrigerating chambers and cooling cabinets, various kinds of process and household furnaces and other thermal equipment, ò thermal and sound insulation of industrial and hou...
|
|
|
|
|
|
Filled acrylic solid surfaces having superior mechanical properties and ease of manufacture are made from reaction curable resin compositions.
|
|
|
|
|
|
Catalyst agents are adhered to p-aramid fabrics and paper supports.
|
|
|
|
|
|
Garments of this technology protect the wearer from hazards such as flame, hot and/or corrosive materials and molten metals while providing for a safety harness next to the body underneath the garment.
|
|
|
|
|
|
The aramid fluff and fluff ball products of this technology have a wide range of applications including filter media, high temperature insulation, resilient filling, absorbency applications, fire retardancy and reinforcement.
|
|
|
|
|
|
This technology comprises a woven or nonwoven fabric disk of heat resistant fibers that serves to protect the flavor of hot beverages, such as coffee or tea, from excess heating.
|
|
|
|
|
|
The Need - A olyolefin/ethylene vinyl alcohol barrier packaging film with superior barrier properties compared to state-of-the-art blends.
|
|
|
|
|
|
The Need - To develop thermoplastic alloy compositions with improved thermoformability.
|
|
|
|
|
|
The Need - To develop a PVC sheeting alternative that is halogen-free but still thermoplastic, flexible and heat-sealable.
|
|
|
|
|
|
Traditional light emitting diodes are semiconductor devices that emit light at very specific wavelengths.
|
|
|
|
|
|
We are looking for a rigid plastic substrate available as sheet or on a roll, with the following specifications: Tensile Strength: Preferably > 30,000 MPa, at least > 25,000 MPa, if possible 40,000 MPa.
|
|
|
|
|
|
The silicone foam must be very light - 0,15 Kilos/cubicmeterThe cells must have very similar sizeThe silicone foam must be very elastic (instant and total shape recovery after deformation)The foam must have a very good water absorption co...
|
|
|
|
|
|
Overview: We are looking for innovative or improved PVCu / composite products, systems and manufacturing technologies relating to home exterior building / construction products and systems.
|
|
|
|
|
|
OVERVIEW Technology is required to enable the reduction of VOC's in binder/resins while maintaining or enhancing existing product properties.
|
|
|
|
|
|
A transparent thin coating or film to be applied on cross linked polystyrene blocks that will be in contact with an aquoseus couple gel to improve scratch resistance and surface hardness with the following parameters.
|
|
|
|
|
|
There is an optimum body temperature for personal comfort and athletic performance in hot weather.
|
|
|
|
|
|
We are looking for a coating to be put on top of an optical layer.
|
|
|
|
|
|
Looking for novel products or ideas to develop into a new helmet for military contract.
|
|
|
|
|
|
This substance must be capable of transporting nano-size particles of 80 to 90% volume Sn/Ag/Cu mix.
|
|
|
|
|
|
We are looking for a solution able to produce bended profiles with variable and as small as possible bending radious.
|
|
|
|
|
|
Machinable wax is often used to make prototype parts with the advantage of obsolete objects and machined away chips simply being melted down to create new raw material.
|
|
|
|
|
|
The polymer must be extrudable.
|
|
|
