 |
|
|
This technology provides an elegant, efficient and cost effective way to measure absolute position in one or two dimensions using a new Point Coupled Linear Transformer (PCLT).
|
|
|
|
|
|
The search for a transparent magnetic substance that is easy to manufacture has been ongoing for many years.
|
|
|
|
|
|
This product is the most efficient concrete waterproofing solution available today.
|
|
|
|
|
|
AIST has developed a large-scale synthetic method of producing imogolite from inexpensive inorganic materials.
|
|
|
|
|
|
The Gage SystemÖ is a patented method of constructing a brick or block wall using a mortar delivery device and a block alignment panel.
|
|
|
|
|
|
Light and recyclable magnesium alloy has been drawing attention and is widely used for practical purposes such as mobile electronic equipment and vehicles.
|
|
|
|
|
|
AIST researchers have developed a thin film alloy of magnesium and titanium that, when applied to glass, may be easily switched between a reflective and transparent state.
|
|
|
|
|
|
This versatile process turns cement, concrete, waste rock from quarrying operations, and other stone or natural materials into low-cost glass-fiber-reinforced architectural panels of great variety and great beauty.
|
|
|
|
|
|
The technology is a method of manufacturing metallic materials based with extremely fine crystal grain sizes via continuous stimulation during solidification.
|
|
|
|
|
|
The flame retardant compounds for cotton, polyester, acrylic fibers, and polypropylene of this technology have high efficacy documented in extensive test results.
|
|
|
|
|
|
Rapid solidification rate (RSR) technology enables production of fine-grained (nanometer-scale) and amorphous metals with uniform chemistry.
|
|
|
|
|
|
AIST proposes a unique method for the preparation of a body of an austempered ductile cast iron (ADI) having a gradient of the mechanical properties within the body along with excellent toughness and strength suitable as a substitute mate...
|
|
|
|
|
|
The ADCA is not only a step in the right direction; it's a revolutionary new concept in aerial delivery system.
|
|
|
|
|
|
Fast-Flo? is a cordless hand-held fluid transfer device designed to transfer pharmacological fluids/solutions from a storage vessel into a receiving vessel using a disposable syringe and needle and other attachments typical of the applica...
|
|
|
|
|
|
The invention is an apparatus for controlling the amount of solar energy and heat transferred into and out of a building or other structure through a glazed opening using a system of pneumatically actuated, reflective shutters.
|
|
|
|
|
|
A new technology which applies a "grafting" technique to form strong adhesive bonds between mating material surfaces.
|
|
|
|
|
|
AIST for the first time provides a method for producing an alcohol, a ketone, and an epoxide by the oxidation of a hydrocarbon with oxygen in the presence of a reducing agent.
|
|
|
|
|
|
This technology relates to a method for the preparation of vitreous hollow microspheres with a photocatalytic activity from a vitreous volcanic deposit as the starting material.
|
|
|
|
|
|
In addition to the traditional uses as ornamental or decorative articles, gold is widely used in various industries as a wiring material of electronic circuits in electronic industries or as a catalytically active ingredient in certain ca...
|
|
|
|
|
|
This ultrasonic echo apparatus can measure tissue inside living bodies, non-invasively.
|
|
|
|
|
|
AIST is seeking an opportunity of a technology transfer and a patent licensing, regarding this SiC three-dimensional filter.
|
|
|
|
|
|
This technology relates to a deodorizing lamp and method for the production of the lamp.
|
|
|
|
|
|
This technology relates to a photocatalyst sheet useful for purifying the living environment, being able to decompose and remove malodorous substances, harmful substances in the air, and prevent developing of bacterium and fungi.
|
|
|
|
|
|
AIST produced a silicon nitride sinter exhibting extremely high strength and toughness in a specific direction.
|
|
|
|
|
|
The only technology of its kind, the Atomic Penetratioin of Materials (APM) technology diffuses the atoms from superior metal(s) and implants them into the interstitial spaces of surface molecules of existing metal parts, creating patenta...
|
|
|
|
|
|
Intellimold is a proven, practical real-time process control method for use in injection molding operations.
|
|
|
|
|
|
This combinatorial method allows the rapid screening of multiple multilayered coating samples.
|
|
|
|
|
|
Carbon-fiber reinforcement in laminate structures has resulted in great improvement in tensile strength, but much-less-than-theoretical improvement in compressive strength.
|
|
|
|
|
|
This technology describes the manufacture of multi-layer solid surface materials comprised of a thin layer of filled polymer integrally formed with a backing of bubble-filled polymer using one-step casting.
|
|
|
|
|
|
Proposed is a novel synthetic inorganic porous material having a chemical composition of the general formula [(SiO2)8 ?(MO2/3)a ?(OH)2/3a+b ]b- ?b/c(Ac+), in which M is an ion of a divalent metal, e.g., Mg, A is a cation of an alkali meta...
|
|
|
|
|
|
The Aircraft Landing/Taxiing Guidance System is the revolutionary new inexpensive tool for safer and accurate landing of todayÆs many different aircraft.
|
|
|
|
|
|
Flexible gas tight film "Claist" is prepared by a compact lamination of clay platelets of thickness around 1 nanometer each.
|
|
|
|
|
|
A Patented, highly cost effective quick fit method for connecting pipes which does not require heavy molded fittings or specialized tools.
|
|
|
|
|
|
TIM has been designed and intended for: ò thermal insulation of refrigerating chambers and cooling cabinets, various kinds of process and household furnaces and other thermal equipment, ò thermal and sound insulation of industrial and hou...
|
|
|
|
|
|
Avery Dennison Corporation has developed a breathable pressure sensitive adhesive building wrap or house wrap suitable for use on the exterior surfaces on buildings prior to the attachment of siding materials.
|
|
|
|
|
|
Flame treatment of solid surface nickel casting molds provides quick seasoning, allowing high parts yields from the start of parts production runs.
|
|
|
|
|
|
This technology comprises the preparation of adhesives for PVC laminates with wood or metal, rugged and durable for both indoor and outdoor use.
|
|
|
|
|
|
Simple to fabricate, assemble and clean, this novel mold-fill coupling design is ideal for automated filling of polymer casting molds.
|
|
|
|
|
|
Utilizing this technology, thermoplastic solid surface materials with enhanced utility due to their unique decorative patterns (or categories of patterns never previously available), including veined or tessellated patterns, geometric inc...
|
|
|
|
|
|
Filled acrylic solid surfaces having superior mechanical properties and ease of manufacture are made from reaction curable resin compositions.
|
|
|
|
|
|
Honeywell's economical filtration process continuously captures undesirable air borne odor or gas contaminants from an air stream through unique trilobal wicking fibers.
|
|
|
|
|
|
Overview: We are looking for innovative or improved PVCu / composite products, systems and manufacturing technologies relating to home exterior building / construction products and systems.
|
|
|
|
|
|
A transparent thin coating or film to be applied on cross linked polystyrene blocks that will be in contact with an aquoseus couple gel to improve scratch resistance and surface hardness with the following parameters.
|
|
|
|
|
|
We have identified dry milling parameters using an attritor mill that chemically activates a mineral substance into a cement subsitute, similar to fly ash.
|
|
|
|
|
|
Machinable wax is often used to make prototype parts with the advantage of obsolete objects and machined away chips simply being melted down to create new raw material.
|
|
|
|
|
|
The polymer must be extrudable.
|
|
|
