 |
|
|
This technology is based on a strip-shaped electrochemical membrane.
|
|
|
|
|
|
Bagasse is agricultural waste.
|
|
|
|
|
|
This technology provides a method of laser-drilling any component under the control of real-time feedback to provide for predictable, calibrated fluid flow through one or an array of holes formed in the component.
|
|
|
|
|
|
A unique feed additive based on beneficial lactic acid-producing bacteria (LAB) makes it easier for animals to digest and use their feed, thus improving the feed conversion -- a critical factor for good weight gain in animals raised for d...
|
|
|
|
|
|
Ganeden Biotech has solved the problem of adding beneficial lactic acid producing bacteria to both wet and dry foods that undergo processing with heat and pressure.
|
|
|
|
|
|
Associated technologies permit growing atomic monolayer quantum structures of high purity, uniformity, and controllable size, and producing a high-efficiency light-emitting diode that does not suffer from reflection at the semiconductor/a...
|
|
|
|
|
|
When miniaturizing MOS field-effect transistors (MOSFETs) for their high degree of integration and high speed, a source and a drain come close to each other, and the drain field has an effect on the source.
|
|
|
|
|
|
Emissions control system that provides up to 100% removal of hydrocarbons (HC) Carbon monoxide(CO) and Nitrogen Oxides (NOx).
|
|
|
|
|
|
Developed for the automotive industry, where the rapid detection of the partial pressure of oxygen is critical to controlling the air-fuel ratio in modern electronic fuel injection systems, this new-type semiconductor resistance sensor of...
|
|
|
|
|
|
This technology selectively separates fines and small particles that have a desired particle size range by using the particlesÆ specific gravity and their various sedimentation rates in a rotating vessel of vibrating liquid.
|
|
|
|
|
|
This highly flexible C6 perfluoroalkyl formulation overcomes the environmental issues inherent in other perfluoroalkyl tails, and imparts non-stick properties and resistance to oil, grease, solvents, or water that are similar to C8 fluoro...
|
|
|
|
|
|
The search for a transparent magnetic substance that is easy to manufacture has been ongoing for many years.
|
|
|
|
|
|
This new patented technology enables the integration of passive components into the printed circuit board (PCB).
|
|
|
|
|
|
The attractiveness of almost all industrial products is strongly governed by the visual quality and appearance of their finish.
|
|
|
|
|
|
AIST has developed a large-scale synthetic method of producing imogolite from inexpensive inorganic materials.
|
|
|
|
|
|
The Environment Purification Materials team of AIST's Synergy Materials Research Center (Japan) has successfully developed and tested significantly improved electrochemical reactors for the selective elimination of nitrogen oxides (NOx) i...
|
|
|
|
|
|
AIST researchers have developed a thin film alloy of magnesium and titanium that, when applied to glass, may be easily switched between a reflective and transparent state.
|
|
|
|
|
|
This versatile process turns cement, concrete, waste rock from quarrying operations, and other stone or natural materials into low-cost glass-fiber-reinforced architectural panels of great variety and great beauty.
|
|
|
|
|
|
The technology is a method to produce glass material with a promising negative refractive index.
|
|
|
|
|
|
The present technology describes the method for the production of the zeolite membrane.
|
|
|
|
|
|
The present invention relates to an optical micro-machining method of glass.
|
|
|
|
|
|
The present technology proposes a tricalcium-phosphate-based prosthetic material, which is a sintered ceramic body mainly consisting of tricalcium phosphate containing a limited amount of zinc.
|
|
|
|
|
|
The present invention relates to the manufacturing process of a high-temperature ceramics-based composite material, which features excellent heat and oxidation resistance and frictional properties.
|
|
|
|
|
|
The technology is a method of manufacturing metallic materials based with extremely fine crystal grain sizes via continuous stimulation during solidification.
|
|
|
|
|
|
The present invention relates to a process for producing fiber-reinforced silicon carbide composites, which are suitable for a variety of applications requiring improved toughness, such as aerospace high-temperature structural members, ga...
|
|
|
|
|
|
The flame retardant compounds for cotton, polyester, acrylic fibers, and polypropylene of this technology have high efficacy documented in extensive test results.
|
|
|
|
|
|
Rapid solidification rate (RSR) technology enables production of fine-grained (nanometer-scale) and amorphous metals with uniform chemistry.
|
|
|
|
|
|
AIST proposes a unique method for the preparation of a body of an austempered ductile cast iron (ADI) having a gradient of the mechanical properties within the body along with excellent toughness and strength suitable as a substitute mate...
|
|
|
|
|
|
The ADCA is not only a step in the right direction; it's a revolutionary new concept in aerial delivery system.
|
|
|
|
|
|
Fast-Flo? is a cordless hand-held fluid transfer device designed to transfer pharmacological fluids/solutions from a storage vessel into a receiving vessel using a disposable syringe and needle and other attachments typical of the applica...
|
|
|
|
|
|
The invention is an apparatus for controlling the amount of solar energy and heat transferred into and out of a building or other structure through a glazed opening using a system of pneumatically actuated, reflective shutters.
|
|
|
|
|
|
AIST for the first time provides a method for producing an alcohol, a ketone, and an epoxide by the oxidation of a hydrocarbon with oxygen in the presence of a reducing agent.
|
|
|
|
|
|
This technology relates to a method for the preparation of vitreous hollow microspheres with a photocatalytic activity from a vitreous volcanic deposit as the starting material.
|
|
|
|
|
|
In addition to the traditional uses as ornamental or decorative articles, gold is widely used in various industries as a wiring material of electronic circuits in electronic industries or as a catalytically active ingredient in certain ca...
|
|
|
|
|
|
This ultrasonic echo apparatus can measure tissue inside living bodies, non-invasively.
|
|
|
|
|
|
AIST is seeking an opportunity of a technology transfer and a patent licensing, regarding this SiC three-dimensional filter.
|
|
|
|
|
|
This technology relates to a deodorizing lamp and method for the production of the lamp.
|
|
|
|
|
|
This technology relates to a photocatalyst sheet useful for purifying the living environment, being able to decompose and remove malodorous substances, harmful substances in the air, and prevent developing of bacterium and fungi.
|
|
|
|
|
|
AIST produced a silicon nitride sinter exhibting extremely high strength and toughness in a specific direction.
|
|
|
|
|
|
The technology allows the coating of a layer on very thin glass (< 1.2 mm); so thin that it can be wound on a roll for continuous web coating.
|
|
|
|
|
|
This new technology offers an adhesive that is suitable for making an electrically conductive connection to a material or system which is operated at high temperatures, or can even be a heating element.
|
|
|
|
|
|
Glass elements that form a pattern in the glass layer, are embedded in flexible polymer layers.
|
|
|
|
|
|
As feature sizes for integrated circuits become smaller, the demand for improved dielectric films continues to grow.
|
|
|
|
|
|
Honeywell's inventive system monitors battery status (and engine conditions) and controls the alternator to selectively charge the battery.
|
|
|
|
|
|
The inventor has developed a unique binder system for ceramic injection molding that eliminates the need for thermal or chemical debinding required by competing systems.
|
|
|
|
|
|
Proposed is a novel synthetic inorganic porous material having a chemical composition of the general formula [(SiO2)8 ?(MO2/3)a ?(OH)2/3a+b ]b- ?b/c(Ac+), in which M is an ion of a divalent metal, e.g., Mg, A is a cation of an alkali meta...
|
|
|
|
|
|
This invention relates to silica particles modified by at least one type of organic group and provides this with a low cost and easy process.
|
|
|
|
|
|
The Aircraft Landing/Taxiing Guidance System is the revolutionary new inexpensive tool for safer and accurate landing of todayÆs many different aircraft.
|
|
|
|
|
|
Flexible gas tight film "Claist" is prepared by a compact lamination of clay platelets of thickness around 1 nanometer each.
|
|
|
|
|
|
TIM has been designed and intended for: ò thermal insulation of refrigerating chambers and cooling cabinets, various kinds of process and household furnaces and other thermal equipment, ò thermal and sound insulation of industrial and hou...
|
|
|
|
|
|
Reduced delamination during MLC manufacture from thick pastes is the key benefit from this technology.
|
|
|
|
|
|
Users of this technology dramatically reduce or avoid employee exposure to and emission of chlorinated cleaning compounds usually used in printed MLC manufacture.
|
|
|
|
|
|
A compact pressure sensor (about half the size of a cigarette package) that produces highly accurate pressure measurements is provided.
|
|
|
|
|
|
A silicon nitride sintered body has a composition consisting essentially of from 75 to 96 wt % of silicon nitride; yttrium oxide present in an amount ranging from about 2 to 10 wt %; at least one oxide of the Lanthanide (Ln) element, wher...
|
|
|
|
|
|
A silicon nitride sintered body has a composition consisting essentially of 80 to 93% by weight .
|
|
|
|
|
|
A silicon nitride sintered body has a composition consisting essentially of 85 to 94% by weight .
|
|
|
|
|
|
A monolithic silicon nitride ceramic is densified at temperatures lower than 2000.degree.
|
|
|
|
|
|
This invention relates to a ceramic article having a crystalline and continuous silicon nitride phase, iron and a rare earth oxide, the article having a surface area of at least 3.5 m.sup.2 /g, a thermal expansion coefficient smaller than...
|
|
|
|
|
|
A silicon nitride sintered body has a composition consisting essentially of 85 to 94% by weight .
|
|
|
|
|
|
We are searching for innovative products, systems and technologies relating in some way to:Bathroom Sanitary Ware Productso Showeringo Shower enclosures, trays and panelso Hydrotherapy and steam unitso Bathing - for example:o Free-standin...
|
|
|
|
|
|
A transparent thin coating or film to be applied on cross linked polystyrene blocks that will be in contact with an aquoseus couple gel to improve scratch resistance and surface hardness with the following parameters.
|
|
|
|
|
|
Looking for novel products or ideas to develop into a new helmet for military contract.
|
|
|
