 |
|
|
This technology is based on a strip-shaped electrochemical membrane.
|
|
|
|
|
|
Bagasse is agricultural waste.
|
|
|
|
|
|
Magnetic Plungerless Injection System (MPIS) was invented to enhance the therapeutic value and market availability of parenterally delivered pharmaceuticals and vaccines.
|
|
|
|
|
|
DuPont has developed a polymer mulch suitable for playground and horticultural applications.
|
|
|
|
|
|
Developed for the automotive industry, where the rapid detection of the partial pressure of oxygen is critical to controlling the air-fuel ratio in modern electronic fuel injection systems, this new-type semiconductor resistance sensor of...
|
|
|
|
|
|
This technology provides an elegant, efficient and cost effective way to measure absolute position in one or two dimensions using a new Point Coupled Linear Transformer (PCLT).
|
|
|
|
|
|
The search for a transparent magnetic substance that is easy to manufacture has been ongoing for many years.
|
|
|
|
|
|
The focus of this technology is the ability of yeast to reversibly open up the junctions between cells to aid drug delivery.
|
|
|
|
|
|
This new patented technology enables the integration of passive components into the printed circuit board (PCB).
|
|
|
|
|
|
AIST has developed a large-scale synthetic method of producing imogolite from inexpensive inorganic materials.
|
|
|
|
|
|
This innovative hot melt adhesive cures to a thermoset adhesive good for many applications in the vehicular market, home furnishings, edge binding, and electronics.
|
|
|
|
|
|
This technology is a thermoplastic antenna incorporating micron sized conductive fibers within the plastic matrix making it lightweight, corrosion-resistant, and easily fabricated.
|
|
|
|
|
|
Light and recyclable magnesium alloy has been drawing attention and is widely used for practical purposes such as mobile electronic equipment and vehicles.
|
|
|
|
|
|
The Environment Purification Materials team of AIST's Synergy Materials Research Center (Japan) has successfully developed and tested significantly improved electrochemical reactors for the selective elimination of nitrogen oxides (NOx) i...
|
|
|
|
|
|
AIST researchers have developed a thin film alloy of magnesium and titanium that, when applied to glass, may be easily switched between a reflective and transparent state.
|
|
|
|
|
|
This versatile process turns cement, concrete, waste rock from quarrying operations, and other stone or natural materials into low-cost glass-fiber-reinforced architectural panels of great variety and great beauty.
|
|
|
|
|
|
This system uses a simple and innovative concept to allow the creation of a wide range of lightweight, three-dimensional, folding structures with flexible joints.
|
|
|
|
|
|
The technology is a method to produce glass material with a promising negative refractive index.
|
|
|
|
|
|
The present technology describes the method for the production of the zeolite membrane.
|
|
|
|
|
|
The present invention relates to an optical micro-machining method of glass.
|
|
|
|
|
|
The present technology proposes a tricalcium-phosphate-based prosthetic material, which is a sintered ceramic body mainly consisting of tricalcium phosphate containing a limited amount of zinc.
|
|
|
|
|
|
The present invention relates to the manufacturing process of a high-temperature ceramics-based composite material, which features excellent heat and oxidation resistance and frictional properties.
|
|
|
|
|
|
The technology is a method of manufacturing metallic materials based with extremely fine crystal grain sizes via continuous stimulation during solidification.
|
|
|
|
|
|
The technology is an input assisting device for CAD operation.
|
|
|
|
|
|
The present invention relates to a process for producing fiber-reinforced silicon carbide composites, which are suitable for a variety of applications requiring improved toughness, such as aerospace high-temperature structural members, ga...
|
|
|
|
|
|
The flame retardant compounds for cotton, polyester, acrylic fibers, and polypropylene of this technology have high efficacy documented in extensive test results.
|
|
|
|
|
|
DuPont has successfully developed novel technology for enhanced polymer processing.
|
|
|
|
|
|
Novel condensation polymers have been prepared by the copolymerization of a N,N*-disubstituted disulfonamide with an organic acid dihalide such as dicarboxylic dichloride,disulfonic acid dichlorides, bic chloroformates, phosgene, diisocya...
|
|
|
|
|
|
Rapid solidification rate (RSR) technology enables production of fine-grained (nanometer-scale) and amorphous metals with uniform chemistry.
|
|
|
|
|
|
AIST proposes a unique method for the preparation of a body of an austempered ductile cast iron (ADI) having a gradient of the mechanical properties within the body along with excellent toughness and strength suitable as a substitute mate...
|
|
|
|
|
|
The ADCA is not only a step in the right direction; it's a revolutionary new concept in aerial delivery system.
|
|
|
|
|
|
Fast-Flo? is a cordless hand-held fluid transfer device designed to transfer pharmacological fluids/solutions from a storage vessel into a receiving vessel using a disposable syringe and needle and other attachments typical of the applica...
|
|
|
|
|
|
The invention is an apparatus for controlling the amount of solar energy and heat transferred into and out of a building or other structure through a glazed opening using a system of pneumatically actuated, reflective shutters.
|
|
|
|
|
|
A new technology which applies a "grafting" technique to form strong adhesive bonds between mating material surfaces.
|
|
|
|
|
|
AIST for the first time provides a method for producing an alcohol, a ketone, and an epoxide by the oxidation of a hydrocarbon with oxygen in the presence of a reducing agent.
|
|
|
|
|
|
This technology relates to a method for the preparation of vitreous hollow microspheres with a photocatalytic activity from a vitreous volcanic deposit as the starting material.
|
|
|
|
|
|
In addition to the traditional uses as ornamental or decorative articles, gold is widely used in various industries as a wiring material of electronic circuits in electronic industries or as a catalytically active ingredient in certain ca...
|
|
|
|
|
|
This ultrasonic echo apparatus can measure tissue inside living bodies, non-invasively.
|
|
|
|
|
|
AIST is seeking an opportunity of a technology transfer and a patent licensing, regarding this SiC three-dimensional filter.
|
|
|
|
|
|
This technology relates to a deodorizing lamp and method for the production of the lamp.
|
|
|
|
|
|
This technology relates to a photocatalyst sheet useful for purifying the living environment, being able to decompose and remove malodorous substances, harmful substances in the air, and prevent developing of bacterium and fungi.
|
|
|
|
|
|
AIST produced a silicon nitride sinter exhibting extremely high strength and toughness in a specific direction.
|
|
|
|
|
|
Over the past several decades there has been a proliferation of medical diagnostic and treatment devices that involve the use of x-rays, beta rays, gamma rays and radioactive isotopes.
|
|
|
|
|
|
Functional and added value coatings and lacquers are big business in the current market, partly driven by todayÆs consumers and professional users placing high demands on products, in areas such as home appliances, components, packaging, ...
|
|
|
|
|
|
Liquid crystal polymers (LCP's) represent a growing family of high performance engineering polymers.
|
|
|
|
|
|
Liquid Crystal Polymers (LCP's) are superb for making highly detailed, high performance parts such as microcircuit boards or electronic connectors.
|
|
|
|
|
|
The formulation and production of electrically conductive polymer composites is described.
|
|
|
|
|
|
The only technology of its kind, the Atomic Penetratioin of Materials (APM) technology diffuses the atoms from superior metal(s) and implants them into the interstitial spaces of surface molecules of existing metal parts, creating patenta...
|
|
|
|
|
|
Carbon-fiber reinforcement in laminate structures has resulted in great improvement in tensile strength, but much-less-than-theoretical improvement in compressive strength.
|
|
|
|
|
|
This technology provides a method of controlling the rigidity of non-conductive fibers, especially aramid fibers, using DLC coatings.
|
|
|
|
|
|
This technology describes the manufacture of multi-layer solid surface materials comprised of a thin layer of filled polymer integrally formed with a backing of bubble-filled polymer using one-step casting.
|
|
|
|
|
|
Phosphoroustriscaprolactams are useful for effectively promoting esterification, amidation-type polycondensations, or polymer-polymer grafting reactions in an extruder for the purpose of creating compatible polymer blends.
|
|
|
|
|
|
Honeywell has developed a unique method to produce rocket nozzles with the capacity to withstand the higher combustion temperatures required by today's rocket propulsion industry.
|
|
|
|
|
|
Honeywell, a leader in aerospace engine and controls technology, provides an automated, 3-phase process for efficient design, implementation, and verification of programmable logic devices (PLDs) at the device pin level.
|
|
|
|
|
|
Honeywell technology offers innovative fluorinated poly(naphthyl ether) (FPNE) dielectric compounds as an alternative to polyimides typically used as insulator material for multilayer electronic circuit devices.
|
|
|
|
|
|
Honeywell has discovered valuable compounds useful as crosslinking agents for fluorinated polyarylene ethers (FPAEs).
|
|
|
|
|
|
Honeywell technologies offer newly discovered crosslinkable compounds which are utilized as co-monomers or end-cappers for the preparation of many polymers.
|
|
|
|
|
|
Licensees of this sodium manufacturing cell technology will enjoy higher current efficiencies (~4%), 30% lower calcium chloride fed to each cell, and labor force reduction of ~30% relative to standard DowÆs cell operation.
|
|
|
|
|
|
This hot melt polyurethane (PUR) formulation is resistant enough to premature polymerization from humidity to allow long term storage, even of individual parts coated with the PUR adhesive prior to pasting.
|
|
|
|
|
|
Proposed is a novel synthetic inorganic porous material having a chemical composition of the general formula [(SiO2)8 ?(MO2/3)a ?(OH)2/3a+b ]b- ?b/c(Ac+), in which M is an ion of a divalent metal, e.g., Mg, A is a cation of an alkali meta...
|
|
|
|
|
|
This invention relates to silica particles modified by at least one type of organic group and provides this with a low cost and easy process.
|
|
|
|
|
|
The Aircraft Landing/Taxiing Guidance System is the revolutionary new inexpensive tool for safer and accurate landing of todayÆs many different aircraft.
|
|
|
|
|
|
Flexible gas tight film "Claist" is prepared by a compact lamination of clay platelets of thickness around 1 nanometer each.
|
|
|
|
|
|
This technology comprises a method for incorporating heat stabilizer at the desired concentration by diluting masterbatch pellets using unmodified polyamide pellets at the appropriate let-down ratio.
|
|
|
|
|
|
This technology creates a strongly bonded continuous lubricant layer on the surface of thermoplastic resin pellets for injection molding.
|
|
|
|
|
|
TIM has been designed and intended for: ò thermal insulation of refrigerating chambers and cooling cabinets, various kinds of process and household furnaces and other thermal equipment, ò thermal and sound insulation of industrial and hou...
|
|
|
|
|
|
Filled acrylic solid surfaces having superior mechanical properties and ease of manufacture are made from reaction curable resin compositions.
|
|
|
|
|
|
Honeywell's economical filtration process continuously captures undesirable air borne odor or gas contaminants from an air stream through unique trilobal wicking fibers.
|
|
|
|
|
|
Targeted for compression molding applications and preparation of composites, this family of polyimide polymers are curable up to 350 deg C to tough, golden-orange films with high modulus, high glass transition temperatures, high inherent ...
|
|
|
|
|
|
The Need - To develop thermoplastic alloy compositions with improved thermoformability.
|
|
|
|
|
|
Heat exchangers are useful in transferring heat from hot fluid streams to a colder ones and are employed in a wide variety of thermodynamic devices including air-conditioners, refridgerators, freezers, engines, electronic devices, and in ...
|
|
|
|
|
|
Polyacrylonitrile fibers are used to make a duplex cloth from which segments are cut, each segment sequentially placed on a foamed support and needled together with the underlying segments, to build-up a multi-layer, donut shaped preform ...
|
|
|
|
|
|
We are looking for a rigid plastic or composite substrate available as sheet or on a roll, with the following specifications: Tensile Strength: Between 80-200 MPa,Preferably between 100-160 MPa.
|
|
|
|
|
|
Traditional light emitting diodes are semiconductor devices that emit light at very specific wavelengths.
|
|
|
|
|
|
We are searching for innovative products, systems and technologies relating in some way to:Bathroom Sanitary Ware Productso Showeringo Shower enclosures, trays and panelso Hydrotherapy and steam unitso Bathing - for example:o Free-standin...
|
|
|
|
|
|
Overview: We are looking for innovative or improved PVCu / composite products, systems and manufacturing technologies relating to home exterior building / construction products and systems.
|
|
|
|
|
|
A transparent thin coating or film to be applied on cross linked polystyrene blocks that will be in contact with an aquoseus couple gel to improve scratch resistance and surface hardness with the following parameters.
|
|
|
|
|
|
We are looking for reflective polymer or plastic sheets, with the following specification :Modulus : > 10,000 MPaThickness (mm) : =< 1.8Dimensions : maximum 24 x 30 cmThickness fluctuation (mu) : < 50Planarity (bending longest side) : <0....
|
|
|
|
|
|
We are looking for rigid polymer or plastic sheets, with the following specification :Modulus : > 20,000 MPaThickness (mm) : =< 1.3Dimensions : maximum 43 x 35 cmThickness fluctuation (mu) : < 20Planarity (bending longest side) : <0.7 mmT...
|
|
|
|
|
|
Looking for novel products or ideas to develop into a new helmet for military contract.
|
|
|
|
|
|
The polymer must be extrudable.
|
|
|
