 |
|
|
Design and automated production of plastic polymer materials or final products using web extrusion, casting, thermoforming, or vacuforming.
|
|
|
|
|
|
Automated surface defect inspection technology from Nissan identifies potential defects on a painted surface so that they can be remedied.
|
|
|
|
|
|
Surnetics has developed technology to move very tiny volumes of liquids without the need for electricity or other external energy source.
|
|
|
|
|
|
Many applications such as anaerobic bacteria treatment of crude petroleum are evaluated in sealed vessels.
|
|
|
|
|
|
Parker-HannifinÆs PACE Hf miniature ultra-high-flow, low-power proportional valves for inert and non-corrosive gases to control other valves and processes downstream, or act as valves in their own right.
|
|
|
|
|
|
A rotary gas compressor and flow-meter of high precision which can pump gas as well as condensate water or oil for multi purpose, having its Gas Void Fraction 100% (means continuous operation) provided with oil injection system.
|
|
|
|
|
|
-The national institute of AIST in Japan has succeeded in developing a "super high water vapor barrier clay-coated film" (WVB-Claist«) by orienting and densely laminating the modified clay crystals.
|
|
|
|
|
|
Heat transfer fluids ideally should be operable at a broad range of temperatures; have low viscosities to minimize pumping problems at low temperatures and provide an acceptable rate of heat transfer; have a sufficiently low freezing poin...
|
|
|
|
|
|
- The National Institute of AIST, Japan has succeeded in monitoring power generation of each solar panel by direct current power-line communication.
|
|
|
|
|
|
ParkerÆs Active Pressure Controller (APC) series is a family of compact, modular controllers based on piezo actuator technology.
|
|
|
|
|
|
DuPont has successfully developed a less complex, lower cost electrochromatic (EC) technology for controllable light transmission in automotive and architectural safety glazing applications.
|
|
|
|
|
|
The Italians have been doing concrete since Roman times and this new technique allows the rebar for a running or pier foundation to be fabricated in a factory, cast into a concrete shell to hold it together for shipping and then the bulk ...
|
|
|
|
|
|
The mechanism that connects a rifle scope to the gun has not seen much innovation since the Picatinny rail system was introduced in 1911.
|
|
|
|
|
|
A simple, proven system keeps low-rise buildings and vehicles anchored in hurricane winds to reduce injuries, damages and insurance premiums Problem: More frequent and powerful wind storms are injuring people with flying debris and proper...
|
|
|
|
|
|
The Bottom Line 104 million fence posts will be needed for plastic and composite fences in the United States alone in 2014, according to Freedonia Group research on fence demand and 10 foot spacing between posts.
|
|
|
|
|
|
-The national institute of AIST in Japan has developed a flexible switchable mirror film that can be electrically switched between reflective and transparent states.
|
|
|
|
|
|
-The national institute of AIST in Japan has developed switchable mirror devices that can be reversibly changed between reflective and transparent states by either exposing gas or applying electricity.
|
|
|
|
|
|
Developed at a Fortune 500 company, this innovation is a method to control an electric drive transmission that includes an internal combustible engine, which simulates a mechanical clutch for the purpose of modulating torque in order to c...
|
|
|
|
|
|
Melt-Film Fibrillation (MFF) technology produces a material that may deliver improved filter performance over traditional glass media in spray booth filter applications.
|
|
|
|
|
|
Year after year, more people die from inhaling smoke and toxic gases in fire emergencies than from fire itself.
|
|
|
|
|
|
Airqube is an acoustic technology that lets in fresh air but blocks out 85% of incoming noise.
|
|
|
|
|
|
This technology comprises a pipe clamping tool that (1) aligns two adjacent sections of pipe internally (centerlines coincide), (2) provides a back-up plate for the weld, (3) enables an inert gas purge at the weld site, and (4) ensures th...
|
|
|
|
|
|
Venture Isles client, Personal Flight Systems (PFS), holds one of the most coveted patents in novel science, the patent for manned and unmanned electronic flight.
|
|
|
|
|
|
Quick-action shackle-pin safety fastener reduces injuries involving finger pinch & loss.
|
|
|
|
|
|
To meet a need for long-lived semi-conductors, a process has been developed to manufacture alumina-based polycrystalline ceramics.
|
|
|
|
|
|
This innovative hot melt adhesive remains a thermoplastic to a thermoset adhesive good for many applications in the vehicular market, home furnishings, edge binding (banding), and electronics.
|
|
|
|
|
|
A rapid, reproducible method is needed to measure film coating adhesion.
|
|
|
|
|
|
This patent portfolio provides 17 issued US patents and associated foreign filings in MEMS (micro-electro-mechanical systems), with priority dates from 1997 to 2005.
|
|
|
|
|
|
This product is the most effective and efficient concrete waterproofing solution available today.
|
|
|
|
|
|
An unique technology for the damping of impacts that is able to completely control the damping process in a computerized way, reaching maximum efficiency and effectivity.
|
|
|
|
|
|
This is a machine for applying self-adhesive roll labels on a variety of cylindrical boxes, containers and tubes.
|
|
|
|
|
|
This tool removes the rotor hub spindles for several types of helicopter rotor hub designs.
|
|
|
|
|
|
This technology is about a system to screw and unscrew screws or nuts with special heads, with the following specificities: It allows a self centering operation, with high-speed mechanical screwing possible; a high torque transmission bet...
|
|
|
|
|
|
Jet engines revolutionized commercial aircraft during the 20th century.
|
|
|
|
|
|
This technology describes the manufacture of multi-layer solid surface materials comprised of a thin layer of filled polymer integrally formed with a backing of bubble-filled polymer using one-step casting.
|
|
|
|
|
|
This invention addresses the $ 1 Billion USD annual storm water back up damage to finished basements and below grade construction that occurs during power outages when the AC pump cannot operate and DC battery back up pumps are unable to ...
|
|
|
|
|
|
XyloyTM is an injection-molded zinc/aluminum alloy processed in conventional plastic injection-molding equipment and molds.
|
|
|
|
|
|
This micro-reinforcement technology enables new applications where existing thermoplastics, elastomers, thermosets, and reinforcing technologies have not had sufficient toughness or fracture strength, particularly at elevated temperatures...
|
|
|
|
|
|
The anodized washcoat method allows catalysts for catalytic converters to be applied to and adhere to non-ceramic surfaces, including complex metallic shapes such as heat exchangers, ducting fins, and channels.
|
|
|
|
|
|
Liquid metal has been used as a coolant for system-level thermal management for decades in nuclear reactors.
|
|
|
|
|
|
The key drivers in agriculture for the next few decades will be water efficiency, energy efficiency and environmental sustainability.
|
|
|
|
|
|
Aerosol deposition makes possible the formation of ultrathin ceramic films upon metals or plastics at room temperature.
|
|
|
|
|
|
Typical mechanical joints limit rotation, movement, and torque, whereas the illustrated universal joint enables constant power at wide angles generating versatile and extensive uses without jeopardizing power.
|
|
|
|
|
|
There are over 200 billion fasteners consumed each year in the U.S. Within this massive fastener market a void exists for a truly ôpositive-locking/vibration proofö fastener.
|
|
|
|
|
|
This ôdry,ö thin-film actuator holds promise for applications in virtual instrumentation, robotics, and automated equipment.
|
|
|
|
|
|
This technology takes ZDDP -- an anti-wear oil additive in use for over 75 years -- and enhances it by adding fluorine to the chemical backbone.
|
|
|
|
|
|
In weather, over rough roads, or in heavy seas, removable equipment such as radios, GPS, toolboxes, saddlebags and similar gear must be restrained, held securely in the same position, and rapidly released when needed.
|
|
|
|
|
|
Originally developed and marketed as an extension pole for painting, lightbulb-changing, and similar operations, the convenient, single-motion extension principle in this technology is adaptable to any rod or pole that must be extended an...
|
|
|
|
|
|
Since the optimal mixing mode alters during industrial mixing processes in the chemical, food, and pharmaceutical industry, it is worth to apply controlled altering motion components.
|
|
|
|
|
|
Emissions control system that provides up to 99% removal of hydrocarbons (HC) Carbon Monoxide(CO) and Nitrogen Oxides (NOx).
|
|
|
|
|
|
The present invention relates to a multifunctional medical tool for use in proctologic applications, during which a surgeon has to manipulate a surgical instrument, brought within the anal canal.
|
|
|
|
|
|
Successful welding of Nitinol to ferrous alloys including Stainless Steels is achieved by using certain filler metals which help avoid the brittle phases formed during fusion welding of Nitinol to ferrous alloys.
|
|
|
|
|
|
The innovation provider suggests transporting by pipeline a unique proprietary emulsified oil mixture originating from high viscosity oil fields such as some oil sands and heavy crude oil fields.
|
|
|
|
|
|
These unique and patented 125kHz RFID tags and readers enable tag information to be read and written through metal.
|
|
|
|
|
|
ôPocket Blindö consists of a pair of retractable window panels and, unlike conventional blinds, is built into the wall at the time of construction.
|
|
|
|
|
|
To date the use of Fulvic Acid has been limited due to high levels of mineral and chemical contamination.
|
|
|
|
|
|
The single-pivot centrifugal pump was designed for external use as a circulatory assist pump that can be used for two weeks or more.
|
|
|
|
|
|
The patent pending dual blade grader design is adapted for use in association with a tractor having a three-point hitch (other mounting methods are feasible) with the grader being capable of use in grading, cutting, moving, spreading and ...
|
|
|
|
|
|
The FLOMET Mass Flow-Meter is able to measure wide range of mass flow of non-solid medium in pipe-lines directly.
|
|
|
|
|
|
A pressure-sensitive structural adhesive is formed by applying a thin layer of pressure-sensitive adhesive to one or both sides of a core layer of partially cured structural adhesive.
|
|
|
|
|
|
This technology provides an elegant, efficient and cost effective way to measure absolute position in one or two dimensions using a new Point Coupled Linear Transformer (PCLT).
|
|
|
|
|
|
This technology selectively separates fines and small particles that have a desired particle size range by using the particlesÆ specific gravity and their various sedimentation rates in a rotating vessel of vibrating liquid.
|
|
|
|
|
|
The Square Piston Engine (SPEC) represents the next stage in the evolution of the reciprocating internal combustion engine.
|
|
|
|
|
|
RGS is a patented method and product that is designed to efficiently eliminate Gas Locks and Gas Pounding by separating the gas from the oil.
|
|
|
|
|
|
A common problem encountered in the construction sector is that a wheeled scraper or other heavy construction equipment gets stuck due to unstable terrain.
|
|
|
|
|
|
The Spherical Golubev Machine (SGM) is a revolutionary technology for the design and production of positive-displacement machines such as compressors, expanders, pumps, motors, engines and the like.
|
|
|
|
|
|
This innovative hot melt adhesive cures to a thermoset adhesive good for many applications in the vehicular market, home furnishings, edge binding, and electronics.
|
|
|
|
|
|
The Gage SystemÖ is a patented method of constructing a brick or block wall using a mortar delivery device and a block alignment panel.
|
|
|
|
|
|
Hebberd Dynamic Simulation Software (HDSS) A patented method that is specifically designed for analyzing and forecasting equipment components that are routinely replaced.
|
|
|
|
|
|
The High Power atomizer (HPA) can be used in aviation as well as ground machines and portables, which can be applied both for peaceful and for military purposes.
|
|
|
|
|
|
This system uses a simple and innovative concept to allow the creation of a wide range of lightweight, three-dimensional, folding structures with flexible joints.
|
|
|
|
|
|
Foams generated using Rhodia technologies for high resistance to drainage can benefit applications where:
~ foams must maintain their mechanical properties and water content for several hours in severe conditions (shear, contaminants,...
|
|
|
|
|
|
The technology is an input assisting device for CAD operation.
|
|
|
|
|
|
The rapid expansion of the Internet and the ever-increasing demand for bandwidth are fostering significant growth in the global cable and wiring market.
|
|
|
|
|
|
Computer controlled, programable control interface that allows safe intuitive manual control for motorized vehicles that typically move heavy loads or operate in variable terrain.
|
|
|
|
|
|
The present invention shows the superconductive magnetic levitation transportation system with high-efficiency and large-capacity utilizing potential energy as the drive source, which performs short to long distance transportation of carg...
|
|
|
|
|
|
Decomposing reaction of methanol generates reformed gas (endothermic reform reaction) and synthesizing reaction of reformed gas produces methanol (exothermic reform reaction).
|
|
|
|
|
|
This patented self-aligning nutplate enables faster, less expensive and more reliable assembly for parts having non-parallel and/or contoured outer surfaces by eliminating the need for shimming, counter-boring or spot-facing.
|
|
|
|
|
|
A low leakage rotary valve composes of a housing, a rotor, a driving end valve cover and a washing end valve cover.
|
|
|
|
|
|
This highly efficient device for recycling heat from hot water waste has a simple design, compact size and weight, and reclaims about 30 percent of the heat that would otherwise go down the household or industrial drain with used hot water.
|
|
|
|
|
|
AIST proposes a unique method for the preparation of a body of an austempered ductile cast iron (ADI) having a gradient of the mechanical properties within the body along with excellent toughness and strength suitable as a substitute mate...
|
|
|
|
|
|
A new technology which applies a "grafting" technique to form strong adhesive bonds between mating material surfaces.
|
|
|
|
|
|
AIST proposes a two finger micromanipulator for use in biotechnology, medicine, and various industrial fields in which micromanipulation is required.
|
|
|
|
|
|
This technology relates to a micromotion stage for use as a positioning mechanism in devices for fine positioning of objects, semiconductor production equipments, printing machines, scanning-tunneling microscopes and other such precision ...
|
|
|
|
|
|
The present technology provides an eye movement tracking display which comprises an image display able to display a wide view angle image while simultaneously displaying a high-resolution image in the vicinity of the view point of the vie...
|
|
|
|
|
|
The present technology relates to a staircase hoist for wheelchair users in family life and in public facilities.
|
|
|
|
|
|
This technology enables the use of dramatically less expensive flooded screw compressors instead of precision fit dry compressors.
|
|
|
|
|
|
The device allows the perfect alignment of vertically positioned sheets or plates.
|
|
|
|
|
|
This Mechatronic Screw Drive System utilises the well-known principles of the screw, the planetary gear and the roller bearing leading to a surprisingly simple solution for a low part count rotation to translation converter.
|
|
|
|
|
|
This highly effective static mixer can be molded to any outer shape with diameters from 8 cm up to 2 m, and in thicknesses starting at 2 cm.
|
|
|
|
|
|
Magtorque provides a simple, low cost means to monitor torque on rotating elements.
|
|
|
|
|
|
The only technology of its kind, the Atomic Penetratioin of Materials (APM) technology diffuses the atoms from superior metal(s) and implants them into the interstitial spaces of surface molecules of existing metal parts, creating patenta...
|
|
|
|
|
|
Intellimold is a proven, practical real-time process control method for use in injection molding operations.
|
|
|
|
|
|
Sulfide Oxidation: A chemical has been identified that can dissolve sulfide minerals in gold minerals and base metal minerals at moderate temperatures and moderate pH values.
|
|
|
|
|
|
The device described here is capable of peeling a single sheet or plate from a stack that is vertically or near vertically positioned.
|
|
|
|
|
|
Carbon-fiber reinforcement in laminate structures has resulted in great improvement in tensile strength, but much-less-than-theoretical improvement in compressive strength.
|
|
|
|
|
|
These passive and active vibration isolation systems use fluid-filled chambers and are LIVE« (liquid inertial vibration eliminator) systems, which effectively isolate a component from harmonic vibration, such as the vibration prevalent in...
|
|
|
|
|
|
This revolutionary control valve enables fast and efficient switching between open-center and closed-center hydraulic systems.
|
|
|
|
|
|
The mixer described by this technology provides an advanced capability to blend two liquids of differing viscosities without addition of significant heat to the mixed blend.
|
|
|
|
|
|
Sucrose Esters of Fatty Acids (SEFA) are high molecular weight materials with many lipid-like properties, yet because of their unique structure, they provide unique functionalities such as water repellency, lubrication, surface adhesion, ...
|
|
|
|
|
|
This innovative technology describes a petrolatum lotion formulation that can be used as a coating for absorbent articles with topsheets such as diapers, as well as bandages, nylon hosiery and clothing to reduce skin irritation and rashes...
|
|
|
|
|
|
The technology being offered can be used to print sensing or working electrodes in electrochemical biosensor applications.
|
|
|
|
|
|
This technology is about self-piercing capsules.
|
|
|
|
|
|
This technology provides a means for recycling high cost specialty rubbers.
|
|
|
|
|
|
Cohesive particles such as pigments are notoriously difficult to accurately dispense from bulk containers such as supersaks and tote bins.
|
|
|
|
|
|
The electrochemical process (ECM = Electrochemical Machining) is a well known process since many years.
|
|
|
|
|
|
We are offering laser added drilling, welding, cutting, soldering, cladding, re-melting of surfaces, partial hardening, etc.
|
|
|
|
|
|
Filled acrylic solid surfaces having superior mechanical properties and ease of manufacture are made from reaction curable resin compositions.
|
|
|
|
|
|
The AFT is the first and only system that actually prevents tampering, illegal filling and decanting of refillable containers thus reduce the incentive to steal the containers.
|
|
|
|
|
|
Successful performance of BFM (Basic Flight Maneuvers) presents the greatest challenge facing combat pilots.
|
|
|
|
|
|
Five years of Research and Development for a new revolutionary pump, combining the performance of positive displacement with the high volume of a centrifugal in one superior quality pump.
|
|
|
|
|
|
The principal subject for this invention is to provide a drive system for a moveable crossover box that is electrically powered and which is economical to manufacture and convenient to use.
|
|
|
|
|
|
The Torrizo Electromagnetic Accelerator Rail Gun 6000 (TEMAG 6000) is a new innovation in rail gun technology.
|
|
|
|
|
|
This hot melt polyurethane (PUR) formulation is resistant enough to premature polymerization from humidity to allow long term storage, even of individual parts coated with the PUR adhesive prior to pasting.
|
|
|
|
|
|
This technology provides a polyurethane hot melt adhesive with superior properties over a wide temperature range--- after curing, the adhesive has high heat stability and also does not become brittle under low temperature conditions.
|
|
|
|
|
|
This technology provides a low temperature curing coating for metal structures such as oil storage tanks, bridges, ships, and buildings, enabling application in Northern climates with their cooler and shorter windows for application.
|
|
|
|
|
|
The FLASH is a patented product designed for road safety.
|
|
|
|
|
|
Indexing multiple machine tools is expensive, cumbersome and problematic.
|
|
|
|
|
|
Kostitsyn IP (Kostitsyn Intellectual Properties) issues notice of sale of US Patent# 5870893.
|
|
|
|
|
|
This quantitative testing device measures the sprayability of a dispersion under conditions found in commercial practice.
|
|
|
|
|
|
A three layer semi-permeable membrane structure for use in textile applications, consisting of a hydrophilic inner layer and hydrophobic exterior layers of copolyetherester elastomer films, leads to an enhanced lifetime breathable waterpr...
|
|
|
|
|
|
This invention relates to a player for concealing a picture and, more particularly, to a player for picture concealment and concealment release which conceals a picture during the recording of a video signal, and releases picture concealm...
|
|
|
|
|
|
This invetion relates to a camera moving apparatus which senses a subject as it moves and moves the camera in the moving direction of the subject and takes a picture of it.
|
|
|
|
|
|
A small scale injection moulding machine which fits easily on your laboratory bench or in a fume cupboard!
|
|
|
|
|
|
Many types of food spoilage are slowed when air and moisture are removed from around the food, however currently available solutions are expensive, take up too much space, and require an involved process.
|
|
|
|
|
|
Rainwater collection is a necessity in some parts of the world and a nutrient rich watering solution for gardeners everywhere.
|
|
|
|
|
|
Overview: This global organization is seeking alternative materials to steel in a friction-dominated environment.
|
|
|
|
|
|
OVERVIEW Seeking a non-destructive test mechanism to detect fracture toughness, hardness, and microstructure (including different grain structures) properties of steel weld zones.
|
|
|
|
|
|
OVERVIEW We want to improve the efficiency of a turbo propulsion system by improving both the propulsive efficiency and improving the core thermal efficiency of the core compressor.
|
|
|
|
|
|
OVERVIEW We need to improve the efficiency of jet engines by minimizing the distance between the rotating vanes of a turbine and the static case structure housing the rotating blades.
|
|
|
|
|
|
Overview: Our client, a multinational, is seeking to identify liquid processing manufacturing solutions or methodologies which accelerate change-overs between product variants on a process line, with no added waste, and therefore deliver ...
|
|
|
|
|
|
We have an urgent requirement for a ceramic slurry coating / impregnation technology, used to produce ceramic filtration media from a reticulated polymer foam substrate.
|
|
|
|
|
|
OVERVIEW Our biological-source processes produce a broth/mixture of amino acids and ions, including valine, leucine, isoleucine, and alanine, among other substances.
|
|
|
|
|
|
Overview: Our client, a multinational, is seeking to identify spectral filter technologies to operate within a demanding optical environment.
|
|
|
|
|
|
OVERVIEWThis organization wants a simple, real-time way to identify that a plant area is clear of beryllium contamination and, if it is not, obtain a general assessment of the level of contamination that may be present - without having to...
|
|
|
|
|
|
Overview: We are seeking new technologies, methods or processes to enable the removal of heavy metals and toxins from waste streams in steel making.
|
|
|
|
|
|
Overview This global organization is seeking a low weight brake energy storage system for use in smaller commercial vehicles.
|
|
|
|
|
|
OVERVIEW This company is seeking a way to disinfect and sanitize hands and surfaces that does not depend on chemicals for bacteria kill, does not involve applying liquid, and does not use UV light.
|
|
|
|
|
|
We're looking for a way to provide a four+ meter (14-foot) horizontal extension for the tape of a tape measure, without the tape buckling or "snapping.
|
|
|
|
|
|
OVERVIEW We need to extend horizontally the loose end of a small coil of lightweight stored material without external support -- essentially, achieving a cantilever supported only at one beam end.
|
|
|
|
|
|
OVERVIEW We wish to double (or more) the usable lifetime and performance of professional and industrial cutting tools such as band saws, reciprocating saws, auger bits, HSS drills, hole saws, and blades for circular saws.
|
|
|
|
|
|
OVERVIEW A client is seeking innovative ways to join identical elastic materials.
|
|
|
