 |
|
|
The patent pending dual blade grader design is adapted for use in association with a tractor having a three-point hitch (other mounting methods are feasible) with the grader being capable of use in grading, cutting, moving, spreading and ...
|
|
|
|
|
|
Airqube is an acoustic technology that lets in fresh air but blocks out 85% of incoming noise.
|
|
|
|
|
|
A pressure-sensitive structural adhesive is formed by applying a thin layer of pressure-sensitive adhesive to one or both sides of a core layer of partially cured structural adhesive.
|
|
|
|
|
|
This technology provides an elegant, efficient and cost effective way to measure absolute position in one or two dimensions using a new Point Coupled Linear Transformer (PCLT).
|
|
|
|
|
|
A high speed, low cost optical deflecting element made possible by orienting ferroelectric liquid crystal perpendicularly onto the substrate.
|
|
|
|
|
|
RGS is a patented method and product that is designed to efficiently eliminate Gas Locks and Gas Pounding by separating the gas from the oil.
|
|
|
|
|
|
A common problem encountered in the construction sector is that a wheeled scraper or other heavy construction equipment gets stuck due to unstable terrain.
|
|
|
|
|
|
The search for a transparent magnetic substance that is easy to manufacture has been ongoing for many years.
|
|
|
|
|
|
The attractiveness of almost all industrial products is strongly governed by the visual quality and appearance of their finish.
|
|
|
|
|
|
This technology features a uniquely designed suction head that eliminates problems typically experienced in alluvial diamond mining, mud, sewerage pumping or dredging operations.
|
|
|
|
|
|
This innovative hot melt adhesive cures to a thermoset adhesive good for many applications in the vehicular market, home furnishings, edge binding, and electronics.
|
|
|
|
|
|
The Gage SystemÖ is a patented method of constructing a brick or block wall using a mortar delivery device and a block alignment panel.
|
|
|
|
|
|
Hebberd Dynamic Simulation Software (HDSS) A patented method that is specifically designed for analyzing and forecasting equipment components that are routinely replaced.
|
|
|
|
|
|
This system uses a simple and innovative concept to allow the creation of a wide range of lightweight, three-dimensional, folding structures with flexible joints.
|
|
|
|
|
|
Foams generated using Rhodia technologies for high resistance to drainage can benefit applications where:
~ foams must maintain their mechanical properties and water content for several hours in severe conditions (shear, contaminants,...
|
|
|
|
|
|
The rapid expansion of the Internet and the ever-increasing demand for bandwidth are fostering significant growth in the global cable and wiring market.
|
|
|
|
|
|
Computer controlled, programable control interface that allows safe intuitive manual control for motorized vehicles that typically move heavy loads or operate in variable terrain.
|
|
|
|
|
|
The present invention shows the superconductive magnetic levitation transportation system with high-efficiency and large-capacity utilizing potential energy as the drive source, which performs short to long distance transportation of carg...
|
|
|
|
|
|
This patented self-aligning nutplate enables faster, less expensive and more reliable assembly for parts having non-parallel and/or contoured outer surfaces by eliminating the need for shimming, counter-boring or spot-facing.
|
|
|
|
|
|
This highly efficient device for recycling heat from hot water waste has a simple design, compact size and weight, and reclaims about 30 percent of the heat that would otherwise go down the household or industrial drain with used hot water.
|
|
|
|
|
|
AIST proposes a unique method for the preparation of a body of an austempered ductile cast iron (ADI) having a gradient of the mechanical properties within the body along with excellent toughness and strength suitable as a substitute mate...
|
|
|
|
|
|
AIST proposes a two finger micromanipulator for use in biotechnology, medicine, and various industrial fields in which micromanipulation is required.
|
|
|
|
|
|
This technology relates to a micromotion stage for use as a positioning mechanism in devices for fine positioning of objects, semiconductor production equipments, printing machines, scanning-tunneling microscopes and other such precision ...
|
|
|
|
|
|
The present technology provides an eye movement tracking display which comprises an image display able to display a wide view angle image while simultaneously displaying a high-resolution image in the vicinity of the view point of the vie...
|
|
|
|
|
|
The present technology relates to a staircase hoist for wheelchair users in family life and in public facilities.
|
|
|
|
|
|
This technology enables the use of dramatically less expensive flooded screw compressors instead of precision fit dry compressors.
|
|
|
|
|
|
The CG-Lock is a patented, true ôfirst-of-its-kindö product.
|
|
|
|
|
|
This new Electrochromic (EC) Devices show improved contrast.
|
|
|
|
|
|
The only technology of its kind, the Atomic Penetratioin of Materials (APM) technology diffuses the atoms from superior metal(s) and implants them into the interstitial spaces of surface molecules of existing metal parts, creating patenta...
|
|
|
|
|
|
Sulfide Oxidation: A chemical has been identified that can dissolve sulfide minerals in gold minerals and base metal minerals at moderate temperatures and moderate pH values.
|
|
|
|
|
|
Carbon-fiber reinforcement in laminate structures has resulted in great improvement in tensile strength, but much-less-than-theoretical improvement in compressive strength.
|
|
|
|
|
|
We have satisfied the contradicting requirements to simultaneously achieve high-precision transfer while reducing manufacturing cycle time.
|
|
|
|
|
|
These passive and active vibration isolation systems use fluid-filled chambers and are LIVE« (liquid inertial vibration eliminator) systems, which effectively isolate a component from harmonic vibration, such as the vibration prevalent in...
|
|
|
|
|
|
This technology describes the manufacture of multi-layer solid surface materials comprised of a thin layer of filled polymer integrally formed with a backing of bubble-filled polymer using one-step casting.
|
|
|
|
|
|
This revolutionary control valve enables fast and efficient switching between open-center and closed-center hydraulic systems.
|
|
|
|
|
|
Reduced costs and improved web caliper and wound roll quality may result from using this patented winding control technology for stretchable webs; this winding technology can improve caliper uniformity as well as uneven machine direction ...
|
|
|
|
|
|
This patented technology improves efficiency and throughput to equipment suppliers and end users alike who spray or extrude fluids of all types through nozzles; utilizing ultrasonic energy in a unique nozzle configuration, end users gain ...
|
|
|
|
|
|
The handler is designed to handle cassettes with sheet-like or film-like material of different sizes, with a different cassette for each size.
|
|
|
|
|
|
A CAD system is presented that allows the design of rollerpairs for the transport of thin film or sheet materials.
|
|
|
|
|
|
"Optimized Material Usage in Blow-Molded Parts" (OMU) is a software simulation package that can provide information for optimizing the design and manufacture of blow-molded parts.
|
|
|
|
|
|
This technology provides a polyurethane hot melt adhesive with superior properties over a wide temperature range--- after curing, the adhesive has high heat stability and also does not become brittle under low temperature conditions.
|
|
|
|
|
|
This technology provides a low temperature curing coating for metal structures such as oil storage tanks, bridges, ships, and buildings, enabling application in Northern climates with their cooler and shorter windows for application.
|
|
|
|
|
|
Indexing multiple machine tools is expensive, cumbersome and problematic.
|
|
|
|
|
|
The Crack TrackerTM System has been developed for crack routing, including the Crack TrackerTM Crack sealer, which is in development to be released in the near future.
|
|
|
|
|
|
The use of a peelable release layer during the extrusion coating of a substrate allows a thin layer of a low viscosity polymer to be successfully applied.
|
|
|
|
|
|
A three layer semi-permeable membrane structure for use in textile applications, consisting of a hydrophilic inner layer and hydrophobic exterior layers of copolyetherester elastomer films, leads to an enhanced lifetime breathable waterpr...
|
|
|
|
|
|
Filled acrylic solid surfaces having superior mechanical properties and ease of manufacture are made from reaction curable resin compositions.
|
|
|
|
|
|
An apparatus that deposits multiple layers of high performance coating on complex curved substrates (such as lenses or visors), where the coating is tuned to prevent the passage of specific frequencies of light.
|
|
|
|
|
|
Polyacrylonitrile fibers are used to make a duplex cloth from which segments are cut, each segment sequentially placed on a foamed support and needled together with the underlying segments, to build-up a multi-layer, donut shaped preform ...
|
|
|
|
|
|
This technology relates to a lubricative coating and filler material for restoring metal surfaces that have been scratched, scored, grooved or otherwise damaged to a functional condition to avoid costly repairs and minimizing scrap for me...
|
|
|
|
|
|
An optical light source is interfaced to an optical fiber by mounting the optical light source on a source carrier, mounting the optical fiber on a fiber carrier, aligning the optical fiber with the optical light source and bonding the so...
|
|
|
|
|
|
A sensor and a method for determining the basis weight of a coating material containing CaCO.sub.3 on a substrate is described.
|
|
|
|
|
|
This invention relates to a process for remediating vaporous pollutants which comprises passing a vaporous stream containing one or more of pollutants through a bioreactor, the bioreactor comprising a plurality of biologically active bodi...
|
|
|
|
|
|
A method for separating hydrogen fluoride from a chemical mixture is provided.
|
|
|
|
|
|
A fiber having increased cut resistance is made from a fiber-forming polymer and a hard filler having a Mohs Hardness Value greater than about 3. The filler is included in an amount of about 0.05% to about 20% by weight.
|
|
|
|
|
|
A method of making a dielectric film on a substrate from a composition containing an organohydridosiloxane resin is presented.
|
|
|
|
|
|
Multilayered films produced by coextruding or laminating films comprised of at least one layer of polymethylpentene, at least one layer of a polyamide and an intermediate polymeric adhesive layer.
|
|
|
|
|
|
The present invention provides a multilayer film structure comprising at least one fluoropolymer film, at least one thermoplastic polymer film, and at least one adhesive layer selected from the group consisting of alkyl ester copolymers o...
|
|
|
|
|
|
An impact resistant rigid composite article comprising a fibrous layer comprising a network of filaments dispersed in a rigid matrix comprising one or more thermosetting resins and one or more thermoplastic resins.
|
|
|
|
|
|
This invention relates to a catalyst support structure, methods of preparing the support structure and a process for using the support structure.
|
|
|
|
|
|
A molding compound consisting of the nickel superalloy Hastelloy X is used to form net-shape or near net-shape articles.
|
|
|
|
|
|
A unique odor filtration device (10) which continuously removes odor causing gas phase contaminants from an air stream through the use of partially hollow wicking fibers (20) impregnated with a selected liquid (18) which can capture odor ...
|
|
|
|
|
|
An air filtration or fluid treatment system includes a nonwoven filter media or mat (10) formed from a plurality of elongated generally hollow fibers (20) each having an internal cavity (22) which has an opening (24) to the fiber surface ...
|
|
|
|
|
|
A fuel system component for a motor vehicle constructed from a polymer material to which are added stainless steel fibers to render the component electrically conductive while retaining moldability.
|
|
|
|
|
|
A fuel filter for a motor vehicle includes a housing made of a base Nylon 12 material to which are added stainless steel fibers to render the housing electrically conductive while retaining moldability.
|
|
|
|
|
|
A fuel filter for a motor vehicle includes a housing made of a base Nylon 12 material to which are added stainless steel fibers to render the housing electrically conductive while retaining moldability.
|
|
|
|
|
|
An apparatus and method is disclosed for recycling contaminated industrial liquids.
|
|
|
|
|
|
Disclosed are novel nickel base single crystal alloy compositions consisting essentially of, by weight, about 8.0-14.0% chromium, 1.5-6.0% cobalt, 0.5-2.0% molybdenum, 3.0-10% tungsten, 2.5-7.0% titanium, 2.5-7.0% aluminum, 3.0-6.0% tanta...
|
|
|
|
|
|
This application relates to a catalyst and a process using this catalyst to convert or destroy organic compounds including organohalogen compounds.
|
|
|
|
|
|
A sensor and a method for determining the coating weight of a coating material containing silicone on a substrate is described.
|
|
|
|
|
|
A unique filtration device (10) which continuously removes gas phase contaminants from an air stream through the use of partially hollow wicking fibers (20) impregnated with a fine solid carbon powder (18) or zeolites and formed into a fi...
|
|
|
|
|
|
A sensor and a method for determining the basis weight of a coating material containing CaCO.sub.3 on a substrate is described.
|
|
|
|
|
|
Machinable wax is often used to make prototype parts with the advantage of obsolete objects and machined away chips simply being melted down to create new raw material.
|
|
|
